782817

Koenic KDW 6041 D FI Manual

24
Zoom out
Zoom in
Previous page
1/98
Next page
24
English
12 The dishwasher must be fastened with
screws in the mounting position.
Wood Countertop: Insert the mounting
bracket on top of the cut-outs. Now screw
the mounting bracket to the underside of
the countertop.
Natural stone countertop: Remove
the plastic caps of the side walls of the
dishwasher (with the door open). Fasten
the dishwasher laterally with the screws
through the openings of the cabinets left
and right from the dishwasher.
13 The dishwasher must be connected to a
drainpipe.
1. The hose is already connected to the
waste water outlet at the back of the
device. Cut the straps and unwind the
hose.
2. Connect the end to a drainpipe. Consider
the max. height of the outlet of the
drainage hose. Make sure that it is
sealed and properly fastened.
Note:
A suitable hose holder is available as an
optional accessory in common DIY stores.
Connect the water inlet to a tap water
supply (3/4”) using the pre-assembled hose
and make sure it is sealed and fastened
tightly.
Note:
• If the water pipes are new or have not
been used for an extended period of
time, let the water run to make sure that
it is clear and free of impurities. If this
precaution is not taken, there is a risk
that the water inlet gets clogged and the
appliance is damaged.
• The dishwasher can be connected to a
warm water supply up to 40°C.
Connect the power plug to the mains.
Note:
Before using the product for the first time,
make sure, that all hydrophilic connections
of the product are correctly sealed and
connected to both the device as well as
the water mains. Check all connections
periodically to avoid possible leakage.
Preparation
Filling salt into the salt container
Fig. 2Depending on your tap water hardness
(hardness degree) use additional salt
(water softener). Always consider the
instructions provided with the salt.
• Remove the basket and then
unscrew and remove the cap from
the salt container.
• Before first usage, pour 1.5 lt. of
water into the salt container of your
machine.
• Place the end of the funnel
(supplied) into the hole and pour in
about 1.5 kg of salt. It is normal for a
small amount of water to come out
of the salt container.
• After filling the container, screw the
cap tight by turning it clockwise.
• Immediately after filling the salt
into the salt container, a washing
program must be started (rapid
program suggested). Otherwise
the filter system, pump or other
important parts of the machine may
be damaged by salty water which
will void the warranty.
• If the salt container is empty, the
softener (salt) indicator light
turns on.
Note:
Depending on how fast/fully the salt
dissolves, the salt warning light may still be
on even though the salt container is filled.
IM_KDW 6041 D FI_6L_201119_V06_HR.indb 24IM_KDW 6041 D FI_6L_201119_V06_HR.indb 24 18/11/2020 6:28 PM18/11/2020 6:28 PM
… 24 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Koenic KDW 6041 D FI at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Koenic KDW 6041 D FI in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 21.62 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info