Manual Klarstein Victoria 10032460 (page 23 of 78) (English, German, French, Italian, Spanish)

756013

Zoom out

Zoom in

1/78

INSTALLATION

Note on Fitting the Oven into the Kitchen Unit

Fit the oven into the space provided in the kitchen unit; it may be tted underneath a

work top or into an upright cupboard. Fix the oven in position by screwing into place,

using the two xing holes in the frame. To locate the xing holes, open the oven door

and look inside. To allow adequate ventilation, the measurements and distances

adhered to when xing the oven.

• If the oven is to work properly, the kitchen housing must be suitable.

• The panels of the kitchen unit that are next to the oven must be made of a heat

resistant material.

• Ensure that the glues of units that are made of veneered wood can withstand

temperatures of at least 120 °C.

• Plastics or glues that cannot withstand such temperatures will melt and deform

the unit, once the oven has been lodged inside the units, electrical parts must be

completely insulated. This is a legal safety requirement.

• All guards must be rmly xed into place so that it is impossible to remove them

without using special tools.

• Remove the back of the kitchen unit to ensure an adequate current of air circulates

around the oven.

• The hob must have a rear gap of at least 45 mm.

Connection of the Oven

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Klarstein Victoria 10032460 in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 1,9 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Klarstein Victoria 10032460 Manual

Product: