705340

Klarstein Speed Iron - 10026364 Manual

11
Zoom out
Zoom in
Previous page
1/19
Next page
11
Steam function setting:
After power on, set temperature control dial to steam ironing position. Heating the indicator light on an iron
unit lights up to indicate the unit being heated up. When desired temperature has been reached, heating in-
dicator light turns off, it is ready for using. During use, heating indicator light will cycle from ON to OFF and
then OFF to ON, it indicates that the iron is automatically heat preservation. Press steam button to start steam
ironing. When you adjust the temperature control dial, steam rate will be adjusted accordingly. MAX steam will
be obtained when set at MAX position, it will be smaller gradually when turn to 〃WOOL/SILK〃
position.
Note: When temperature control dial is located at SYNTHETIC 〃, it is proposed not to activate steam ironing
since temperature is too low to produce steam, it only suits for dry ironing,
Steam Ironing
1. Fill water tank with clean tap water.
2. Connect the unit into a suitable main socket. Turn temperature control dial to steam ironing position.
3. Before first time use of steam ironing, please clean the iron as below methods: Take the iron unit up from
the base unit, press steam button underneath the handle to allow steam release for 30 seconds and then
stop for 30 seconds, do so as a cycle, and repeat above cycle again. The iron is not ready for using until the
heating indicator light turns OFF.
4. During steam ironing, steam rate will be varied when temperature control dial is adjusted to different posi-
tions. This can prevent water leakage caused from soleplate.
5. After using, take the iron unit back onto base unit,turn temperature control dail to ¨MIN〃, and then unplug
from main socket. Slide water tank out from the base unit and empty it.
NOTE: For every first time use, it is normal thatˇs a slightly vibration sound may be occurred from electrical pump
inside the base unit for a few seconds when steam ironing started. If this abnormal conditions coutinuously hap-
pen for more than 60 seconds, please check whether water tank and filter assembled correctly or not.
Vertical steam ironing:
Follow the steam ironing process, and then hold the iron in vertical position between 5cm and 15cm away from
the hanged fabrics. Press down steam switch, this will create vertical steam. This feature is especially used for
removing creases from hanging clothes and curtains. Never directly perform steam ironing on people. (Fig.8)
Handle
Handle attached to the
base unit used to carry the
appliance. Before use, press
down two handle buttons
synchronously, and then lay
the handle down. (Fig.9) Af-
ter use, allow the appliance
completely cool down, be-
fore you lift handle up until
a ¨pa〃 sound is provided.
… 11 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Klarstein Speed Iron - 10026364 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Klarstein Speed Iron - 10026364 in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 1,69 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info