Manual Klarstein Skal - 10032176 (page 31 of 104) (English, German, French, Italian, Spanish)

705326

Zoom out

Zoom in

1/104

8. The beer cooler has 6 preset temperatures. Press and hold the „-“ key to reach the

cooling temperature setting. Press the „-“ key to set a xed value of 12 °C, 10 °C ,

8 °C, 4 °C or 2 °C. The cooling temperature is set by pressing the „-“ key. You can

also press and hold the „+“ button to enter the temperature setting. Then press „+“

to set a xed value of 2 °C, 4 °C, 6 °C, 8 °C, 10 °C, or 12 °C.

The unit has a memory function that uses the last selected

temperature value when you turn on the cooler. By default,

the display shows the current temperature of the beer. Press

and hold the „+“ key to display the set temperature. The

set temperature is displayed for 3 seconds, then the current

temperature is displayed again.

9. Adjust the CO₂ pressure regulator knob to “+” position, to pour the beer out by

pulling down the tap mechanism, and you can adjust the pressure regulator knob

to control the beer ow rate and beer bubble. Note: Clean the glass before

pouring beer out; if the beer or beer cup/glass is in high temperature or the

beer is not cool enough, there are many bubbles when pouring beer out.

10. When taping the beer, lean your beer glass against the pouring spout and slowly

straighten it up with the beer rising, then open the tap mechanism completely to

avoid much bubble; It is advisable to pour half-glass, make a short pause before

continuing the rest. Notes: Never immerse the pouring spout into the beer

glass to avoid much bubble; Remember to lock the tap after nishing

pouring.

11. It is normal to have more bubbles when pouring the rst 3 cup of beer.

12. There will be a sharp and high-speed jet when pouring the last cup of beer from

keg.

Heineken Keg

Heineken kegs are pre-charged with CO₂, and do not require the use of regulator, no

need to install the CO₂ cartridge. And the knob on the top cover does not work.

CO₂ connector

We have a klarstein which has been working perfectly but is now showing temps up to 41 although it is set to 6 and is chilling the beer fine. Confused as to why the temp would be so high? Any help appreciated... Submitted on 15-6-2021 at 19:02
Reply Report abuse
I can't get the gas to push out the lager in the barrel. It just dribbles out. I've changed canister. Submitted on 10-6-2021 at 18:33
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Klarstein Skal - 10032176 in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 5,03 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Klarstein Skal - 10032176 Manual

Product: