Manual Klarstein Skal - 10032176 (page 29 of 104) (English, German, French, Italian, Spanish)

705326

Zoom out

Zoom in

1/104

Universal 5 L beer keg

1. Before piercing the plug on the top of the keg, you must always follow the

instructions marked on the keg to eliminate the excess gas and ensure that the keg

has rested long enough to avoid foam coming out through the tap faucet.

2. Uprightly direct the piercing pin against the sealant on the upper center of the keg

(maybe you need to tear off the marking ring or change a proper sealant), press

the piercing pin/keg lifter to poke the sealant and then push the piercing pin all

immerse in the keg quickly. To assemble the tap mechanism until you hear a “Ka”

sound that will indicate the tap mechanism xes on the beer keg.

3. Open the beer cooler with 30-40 N strength and place the well-assembled keg

into the cooling cavity; Connect the CO₂ connector tube and beer outlet tube with

the keg lifter tube connector. Note: make sure all connection of tap mechanism

is well connected, and without damage. And make sure tap valve is on

close status, and the CO₂ pressure regulator knob is at “Off” status.

Beer Dispensing unit

Keg seal

Beer keg

Beer connector

CO₂ connector

open

closed

We have a klarstein which has been working perfectly but is now showing temps up to 41 although it is set to 6 and is chilling the beer fine. Confused as to why the temp would be so high? Any help appreciated... Submitted on 15-6-2021 at 19:02
Reply Report abuse
I can't get the gas to push out the lager in the barrel. It just dribbles out. I've changed canister. Submitted on 10-6-2021 at 18:33
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Klarstein Skal - 10032176 in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 5,03 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Klarstein Skal - 10032176 Manual

Product: