Manual Klarstein New Breeze 7 10029703 (page 23 of 66) (English, German, French, Italian, Spanish)

653124

Zoom out

Zoom in

1/66

Put the drainage pipe into drainage port and screw

it up, and then bind it with pipe hoop.

Put the rubber plug into the other siede of draina-

ge pipe, fix it with pipe hook and then fix it in the

drainage pipe clip.

Drainage way as follows

In cooling or drying operation, the condensation water will be drained to the chassis and spattered by water-

striking motor. As the temperature of condenser is high, most of the condensation water will be evaporated

and drained to outdoor. So usually, only a little condensation water will be accumulated inside the chassis and

you do not need to discharge the water frequently. When the chassis is full with water, the buzzer will give out

8 sounds and „H8“ is displayed to remind user to discharge water:

• Move the unit to a suitable place for discharging water; do not tilt the unit and keep it horizontal during moving;

• Take the drainage pipe from the clip and pull out the rubber plug on the drainage pipe to discharge water;

• After full water protection is eliminated and the compressor has been stopped for 3 minutes, the unit will

resume operation.

Using a continuous Drainage

Water can be automatically emptied into a floor drain by attaching 14mm inner diameter hose (not included).

Remove the continuous drain

cap 1 by turning it counter clock-

wise then remove the rubber

stopper 2 from the spout.

Screw the drain connector

to(included in the package) the

spout by turning clockwise.

Insert the drainage hose into

drain connector.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Klarstein New Breeze 7 10029703 in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 5,23 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Klarstein New Breeze 7 10029703 Manual

Product: