Manual Klarstein 10033774 Clearcube LCD (page 23 of 66) (English, German, French, Italian, Spanish)

753559

Zoom out

Zoom in

1/66

2. Set the machine start time with the timer: Press the SET button 3times, „88“ is

blinking in the hour display. Press the  button to set the hour. Press the SET button

once again, „88“ is blinking in the minutes display. Press the  button to set the

minutes.

3. Set the machine power off time: Press the SET button 5 times, „88“ is blinking in the

hour display. Press the  button to set the hour. Press the SET button once again,

„88“ is blinking in the minutes display. Press the  button to set the minutes.

4. Timer setting: Press the  button to set the timer. You can choose between the

following function modes: Time to power on (ON) Time to power off (OFF) 

Timer off. Power on default time is 08:00 and power off default time is 12:00.

CLEANING AND CARE

1. Unplug the appliance from the wall outlet before cleaning it or if it will not be used

for an extended period of time.

2. Use a damp cloth to clean both the interior and exterior of the appliance.

3. Do not use organic solvents, boiling water, cleaning agents, strong acid, alkaline

solvents, etc. for cleaning.

4. If the ice machine will be off use for a long time, you should unplug the appliance,

drain off the water and dry the appliance with a clean cloth. Store the ice cube

maker in a clean place.

Cleaning the water tank

First Phase:

• Add equal parts of water and vinegar (1:1) into water storage box.

• In standby mode, keep pressing the On/Off button at least 5 seconds to activate

self-cleaning mode. Please note self-cleaning mode will automatically start after

beep sound.

• During the self-cleaning mode, pump will remain in continuous operation as it feeds

water to the bucket and evaporator coils. This cycle will continue for 5 times.

• When self-cleaning is complete, the appliance automatically switches to standby

mode.

Second Phase:

• Remove the rear drain cap and drain plug, and then drain off the water and grip

the nut.

• Fill the water tank with fresh water up to the maximum permit water volume line.

• In standby mode, keep pressing the On/Off button at least 5 seconds to activate

self-cleaning mode again which will now act as a rinse.

• Upon completion of this nal stage of the self-clean process, the unit automatically

changes to standby mode. Proceed draining the water from the internal reservoir by

removing the rear drain cap and plug. Leave the upper lid open to allow the water

tank to dry.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Klarstein 10033774 Clearcube LCD in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 0,58 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Klarstein 10033774 Clearcube LCD Manual

Product: