753559

Klarstein 10033774 Clearcube LCD Manual

22
Zoom out
Zoom in
Previous page
1/66
Next page
22
EN
4. Ice-Full reminder
When the drop ice testing panel is pressed down by ice cubes, the ICE-FULL indicator
will light up and the machine enters into ice-full reminder mode. If the ice cubes are
removed and the drop ice testing panel is raised again, the machine will go to ice-
making mode automatically.
5. Water leakage reminder
As the water level drops, the oat switch also lowers. When the oat switch is in low
level, the add water indicator will blink. When the pump is drawing water and the oat
switch is still in low level, the add water indicator will continue to blink. If the machine
has an automatically feed water function, the inlet valve will open automatically to add
water when the add water indicator blinking.
When the water leakage reminder appears, please add the appropriate volume of
water. Once the oat switch leaves the low level, the machine will enter into ice-making
mode automatically.
6. Malfunction reminder
If the ice maker machine can’t detect an ice drop signal for three times during ice
making process, it will show the fault icon and a buzzer sound will appear at the same
time. The machine goes into fault alert status. At this point, you need to check whether
there is ice or foreign bodies blocking the ice detection plate’s turning off. To end the
fault mode, tap lightly from above on the ice detection plate (the plate directly below the
evaporator grid) until a slight click is heard.
7. Self-clean mode
In standby mode, keep pressing the On/Off button for 5 seconds, the ice making, ice
full and add water indicators are blinking simultaneously, the machine enters into self-
clean mode. Press the On/Off button for 5 seconds to exit self-clean mode.
8. De-icing mode
In ice making mode, pressing the ice making button and the SELECT button (for ice
cube size selection) simultaneously for 5 seconds will interrupt ice cube production and
remove the ice (already produced ice is ejected into the ice cube storage box). Pressing
both buttons simultaneously again for 5 seconds will exit this mode and return you to
standby mode. If you want to continue with ice cube production, press the ice making
button again.
9. Clock and time setting function
1. Real time setting: Press the SET button one time, „88“ is blinking in the hour display.
Press the button to set the hour. Press the SET button once again, „88“ is blinking
in the minutes display. Press the button to set the minutes.
… 22 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Klarstein 10033774 Clearcube LCD at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Klarstein 10033774 Clearcube LCD in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 0,58 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info