Manual Klarstein 10033257 Icetender (page 19 of 56) (English, German, French, Italian, Spanish)

753570

Zoom out

Zoom in

1/56

Drain the water

• When the appliance is used for the rst time or has not been used for an extended

period of time, drain any water remaining in the appliance. To do this, unscrew

the drainage screw and place a container under it to collect stale water. The rst

and second ice making cycles are just for cleaning the tube system. The resulting

ice should never be consumed. After the water has been drained and the draining

screw is tightened again, the normal ice making procedures can begin and you can

use the ice.

CLEANING AND CARE

1 If the compressor stops for any reasons, such as water shortage, too much ice,

power off, etc., do not restart it right away. Wait at least 5 minutes before restarting

to protect the compressor.

2 Check the connectors of the water inlet and outlet tubes regularly and drain the little

surplus water that may occur.

3 If the ice maker will be unused for long periods of time, please screw off the plastic

drainage connector screw on the back of the ice maker so as to drain the surplus

water and place a container underneath to collect the water. Then screw it on.

Wipe the inner liner of the ice storage container with a clean rag.

4 Pull out the mains plug only at the plug head and do not pull on the cable under

any circumstances.

5 Clean the ice maker and its water supply system at least once a month. Unplug the

appliance from the wall outlet before cleaning.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Klarstein 10033257 Icetender in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 1,25 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Klarstein 10033257 Icetender Manual

Product: