653122
14
Zoom out
Zoom in
Previous page
1/46
Next page
Installation of the C shape buckle of the heat exhaust hose and unit
Take out the C shape buckle of the heat exhaust hose and remove the plastic bag.
Point the rotary hole at the end of the heat exhaust hose snap toward the rotation shaft of the back
shell and slide it onto the back shell in accordance with the snap joint direction of the rotation shaft
on the back shell (see picture). When the end snap joint at the end of the rotation shaft of the back
shell sticks out of the snap, it means that the heat exhaust hose snap has been slided into place.
Rotate the C shape buckle counterclockwise to clip the snap joint of the C shape buckle of the back
shell successfully through the guide of the slide way of the back shell (see picture).
Installation of the heat exhaust hose assembly and unit
Pull the end of the heat exhaust hose apart by several turns.
Hold the end handle of the C shape buckle with the left hand and the heat exhaust hose short
connector with the right hand, put one end of the heat exhaust hose that is pulled apart onto the
snap of the lower air duct bottom, press the C shape buckle with the left hand by force so that the
C shape buckle of the heat exhaust hose clips the snap joint of the back shell. The end of the heat
exhaust hose must reach one step inside the bottom of the lower air duct (see picture).
The few turns at the end of the heat exhaust hose must be snapped in the snap of the lower air
duct bottom. The C shape buckle that clips the heat exhaust hose must clip the back shell and heat
exhaust hose rmly. Hold the unit with one hand and the heat exhaust hose short connector with
another hand; or both people cooperate with one person holding the unit and the other person
pulling the heat exhaust hose to prolong the heat exhaust hose gently.
14
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Klarstein 10028188 Pure Blizzard 3 2G 3-in-1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Klarstein 10028188 Pure Blizzard 3 2G 3-in-1 in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 5,8 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info