784421
55
Zoom out
Zoom in
Previous page
1/68
Next page
55
EN
Cleaning and maintenance
5.1 Cleaning the metal lters
The grease lters must be cleaned
regularly. Increased grease deposits in
the lter can catch re and also spread
unpleasant odours.
Grease lters clogged with dirt particles
can seriously impair the function of the
appliance.
Cleaning interval for metal grease l-
ters: every 2 - 3 weeks according to the
frequency of use.
Remove the metal lters as shown in
the following illustration:
(Illustration may vary)
Soak the metal grease lters well in
hot rinse water (min. 2-3 min.),
then clean them with a so brush and
then rinse well with hot water.
If necessary, repeat the process.
When cleaning metal grease lters
take care not to damage the mesh.
The metal grease lters can also be
cleaned in the dishwasher in a stan-
dard program with about 60 °C.
To avoid fatty deposits on dishes or
the accumulation of food particles in
the mesh of the lter, the metal lters
should be cleaned separately from di-
shes and glasses. Heavily soiled metal
lters should rst be soaked well in
hot rinse water.
Allow the lter to dry thoroughly and
carefully replace it in the extractor
hood.
Frequent cleaning or the use of ag-
gressive cleaning agents can cause
color changes of the metal surface.
These have no inuence on the lter
function and are not a reason for
complaint.
!
Avoid using alkaline cleaning agents
(ph value over 7).
5.2 Carbon lters
The carbon lter neutralises unpleasant
odours from the room air, which is nee-
ded when operating the extractor hood
in recirculation mode.
Traditional carbon lters (normally
round in shape) can be neither
washed nor regenerated.
They must be replaced.
Replacement interval for carbon lters:
every 9 - 12 months according to fre-
quency of use.
To remove the activated carbon lter
see installation chapter; assembly in
reverse order.
Original carbon lter
for this model: K122
55


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for KKT Kolbe ORION9109S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of KKT Kolbe ORION9109S in the language / languages: English, German as an attachment in your email.

The manual is 1.97 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info