Manual KKT Kolbe FREE6004TC (page 64 of 72) (English, German)

784448

Zoom out

Zoom in

1/72

8.6 Electrical connection

Only connect the appliance to the po-

wer supply once it is properly installed.

If the appliance is not tted with a con-

nector plug, a two-pole switch, confor-

ming to standards with a minimum open

contact gap of 3 mm is to be installed by

an authorized tradesman in an easily ac-

cessible location.

When the hood is connected to the

mains, all control lamps light up briey

and the hood switches to standby mode

(accompanied by a beep signal).

Never install the appliance if the data

on the rating plate (V) does not agree

with your supply voltage.

You will nd the rating plate inside the

appliance, behind the grease lter.

If the extractor hood is tted with a

standard connector plug, connect this

to an easily accessible standard socket.

8.3 Using the extractor hood as

an exhaust air hood (with air

extracted to outdoors)

If the extractor hood has been tted at

the factory with a carbon lter, this must

be removed for exhaust air operation.

It is only practicable to use this when

operating your hood in circulation

mode

8.4 Converting the extractor

hood to a circulation hood

If you wish to use the hood as a circulati-

on hood, you must mount the activated

carbon lter(s) to the fan motor before

using the hood. If not included in the

scope of supply, you must obtain the

carbon lter(s) from the supplier of your

extractor hood.

8.5

Mounting the carbon lter

• Remove the metal grease lter.

• The carbon lter is mounted in two

parts to the right and le of the motor.

Check whether the teeth correspond

to the direction of the rotation of the

respective side.

• Turn the activated carbon lter onto

the motor housing (usually clockwise).

• Reinsert the metal lter.

Installation

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of KKT Kolbe FREE6004TC in the language / languages: English, German as an attachment in your email.

The manual is 1.43 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

KKT Kolbe FREE6004TC Manual

Product: