784262
80
Zoom out
Zoom in
Previous page
1/92
Next page
80
Using the appliance
Clock setting
Aer connecting the unit to the power, the symbols 0:00
will be visible on the display.
Setting the current time
Press the button. The hour digits will ash.
Press and to set the current hour.
Press the button again. The minute digits will ash.
Press and to set the current minute.
Press the button again to nish the clock settings.
The display „:“ will ash and the time will be displayed
constantly.
Hints
The clock is set in 24-hours-format.
If the circuit is interrupted, the clock is reset to 0.
Selection of the heating type
Press repeatedly until the related indicator of your
desired heating function will be displayed.
Press and , to set the cooking time.
Note:
The time is set as follows:
0 – 0:30 min: in 1-minute steps
0:30 min – 9:00 hours: in 5-minutes steps
Then you can press the button to set the cooking and
the and keys, you can adjust the temperature.
Note:
The temperature is set in 5 °C steps.
Press to conrm and to start operation.
The standard cooking time is 9 hours.
Modifying the temperature or time while cooking
Press the button. The icon will be displayed.
With the und keys, you can now adjust the temperature.
Press the button again. The icon will disappear.
Now you can adjust the time using the und keys.
Conrm your setting(s) by pressing the button.
Time inquiring
During the cooking process, it is possible to switch
between the cooking time display and the clock display.
Use the button to display the cooking time, if set.
If the clock was set, press button again to switch back
to the display of the cooking time.
Reminder function
The oven has a 9-hours-reminder, this function will help
you to remind to start cooking in a certain time from 1
minute to 9 hours. Only when oven is in standby mode,
the reminder can be set.
Press the reminder setting button .
To set the reminder countdown, press and .
Press to conrm setting. „:“ will ash and the indicator
for the reminder
will light up. Now the time counts
down.
Note:
The oven buzzer will sound for 10 times aer the
time back to zero hour .
symbol disappears
on the screen to remind you to start cooking. You
can cancel the reminder during setting by pressing
the stop button; Aer the reminder has been set,
you can cancel it by pressing stop button twice.
Setting an end point of the cooking time
This function only can be used, if the clock has been set.
In standby mode, press the button 2 times, so that the
display shows and “End”.
Press the and buttons to set the target hour for the
end of the cooking time.
Press the button again.
Use the and buttons to set the target minute.
Set the heating function you require using the button.
Aer setting a temperature if needed, press to start
operation.
When the cooking process will be complete / When the set
target time will be reached, a beep signal will sound 5 times.
Note:
Aer starting this function, the clock, the icon
and „End“ is displayed.
By pressing the button you can inquire the set
end time (Display duration 3 min).
Setting and programming
80


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for KKT Kolbe CC9001IND at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of KKT Kolbe CC9001IND in the language / languages: English, German as an attachment in your email.

The manual is 2.92 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info