768512
8
Zoom out
Zoom in
Previous page
1/58
Next page
Installation method for children from 9 to 18 kg (Group I)
4) Side impact protection devices ( Part. R of Fig.3) : Activate the Side
impact protections on both sides of the seat by pushing them in a for-
ward direction as shown in Fig.12. Follow the reverse process to disable
the Side impact protections.
IMPORTANT NOTES:
For safety reason, the side impact protections must always be kept open
when carrying a child.
Do not install this child car seat on a vehicle seat provided with frontal
airbag, unless this device can be disabled ( always refer to your vehicle
handbook ) .
1) This is an ISOFIX CHILD RESTRAINT SYSTEM.
It is approved to European ECE No. 44, 04 series of amendments for ge-
neral use in vehicles tted with ISOFIX anchorages systems.
2) It will t vehicles with positions approved as ISOFIX positions (as de-
tailed in the vehicle handbook), depending on the category of the child
car seat and of the xture.
3) The mass group and the ISOFIX size class for which this device is in-
tended is Group I ( 9to 18 kg ) , Class B1.
If in doubt, please contact the retailer or the manufacturer of this child
restraint system.
WARNING:
For children from 9 to 18 kg, ALWAYS install the seat forward facing, and
the available reclining positions are : 1,2 and 3 ( Fig. 7 ).
Place the child seat on the appropriate vehicle seat, in the travel di-·
rection.
Make sure the vehicle seat is secured in the rearmost position and its ·
seatback is locked in the vertical position.
Make sure the child seat is adjusted to its most reclined position.·
If the baby's weight is less than 13 kg it is necessary to use the internal ·
pad (part D of Fig. 2 ).
Settings
H. 5-point Harness
I. Headrest
J. Safety Buckle
K. Chest protection pads
L. Harness release/control push-button
M. Reclining adjustment lever
N. Headrest adjustment device
O. Isox connectors (left and right )
P. Isox connectors release buttons ( left and right )
Q. Isox connectors guides
R. Side impact protections ( left and right )
S. Plastic paddle for cover insertion, after washing.
T. Storage space for Top Tether strap and instruction booklet
U. Top Tether hook
V. Top Tether lenght adjuster
W. Top Tether storage lid
This child car seat has diverse settings to better suit the needs of your
child.
1) The angle of the seat is adjustable to allow a better rest to the child
during long trips, always in the maximum safety. With reference to Fig. 5,
adjust the angle of the backrest according to the weight of the child .
2) The internal pad ( part. D of Fig. 2) is made of soft and breathable ma-
terials and designed to offer a better containment for younger children
and is designed to provide them with an adequate position, always with
the highest level of comfort and safety. For children over 13 kg the inter-
nal pad must be removed ( Fig. 5A ).
3) The headrest is provided with a height adjustment mechanism to po-
sition at the right level the harness straps, according to the child's height.
The headrest is correctly positioned when the harness slots at the same
height of the child shoulders or slightly above ( Fig. 8 ).
To change the position of the headrest and the shoulder straps, pull
upwards the headrest adjustment device ( Part. N of Fig. 3 ) and move
the headrest in the required position, upward or downward ( Fig.6 ).
6 7
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kiwy Alia at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kiwy Alia in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 5,55 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info