611365
17
Zoom out
Zoom in
Previous page
1/32
Next page
17
Settings
Reprogramming
Some of the machine's functions can be
reprogrammed. You get into the machine's change
program using the machine's ordinary buttons as
per the instructions below. The selection will be
retained until the next time you reset this function.
Even if the machine is turned off at the main switch
or loses power for any other reason,
all selections registered before the interruption of
power will be retained.
Child-safe button lock
You can prevent a child starting the machine by
accident or changing the settings by programming
the machine with a button lock, which requires the
Temperature and Drying buttons to be pressed
simultaneously to start up the machine. The button
lock will automatically be reactivated after three
minutes.
1. Switch off the dishwasher with the main switch.
+
2. Hold in the Temperature and Drying buttons
while pressing the main switch. The
Temperature, Drying and start symbols will
flash. Release the Temperature and Drying
buttons.
3. Press the Program button - when the AUTO
wash symbol is lit, the button lock has been
activated.
4. Then press the Start/Stop button to confirm the
setting.
or Reset:
1. Switch off the dishwasher with the main switch.
+
2. Hold in the Temperature and Drying buttons at
the same time as pressing the main switch.
3. Press the Program button - when the AUTO
wash symbol goes out the button lock has been
deactivated.
4. Then press the Start/Stop button to store the
setting.
Setting water hardness
If you have a dishwasher with a water softener, you
may need to change the setting, depending on the
degree of hardness of the water. Phone your local
Water Board to check the water hardness in your
area. The dishwasher is set for low water hardness
on delivery.
1. Switch off the dishwasher with the main switch.
2. Press the main switch while holding in the
Start/Stop switch. Release the Start/Stop button.
3. Press the Program button from one to six times
depending on the hardness of the water.
Program symbols will light up as you press. See
illustration.
* All program indicators extinguished: Machines
without water softeners and machines with water
softeners and low water hardness.
4. Press the Start/Stop button and the setting will
be stored until next time you want to make a
change.
Setting water hardness °dH °fH
* * * * * * 0-5 0-9
6-8 9-14
9-14 15-25
15-19 26-34
20-29 35-52
30-44 53-79
45+ 80+
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for KitchenAid KDFX 7015 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of KitchenAid KDFX 7015 in the language / languages: English as an attachment in your email.

The manual is 2,96 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of KitchenAid KDFX 7015

KitchenAid KDFX 7015 User Manual - German - 32 pages

KitchenAid KDFX 7015 User Manual - French - 32 pages

KitchenAid KDFX 7015 Installation Guide - All languages - 16 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info