16
This periodical operation can be performed using a
soft brush, by performing a vertical movement on
the fins of the evaporator. If there are greasy
deposits, use a brush soaked in alcohol.
Important! Do not scrape the surfaces with sharp or
abrasive objects!
During the above mentioned operations, always
wear protective gloves.
Important! When the cleaning is completed,
carefully refit the covers and firmly tighten the
fastening screws. Only after this operation it is
possible to start the machine.
DOWNTIME
If the appliance is not used for a long period of time,
made a thorough cleaning inside and outside, protect
the exterior surfaces with specific oil-based products
for steel and leave the chamber door slightly open.
Important! Disconnect the power plug until used
again.
Important! Before using again check the integrity
of the appliance and carry out a thorough cleaning
of the blast chiller.
ROUTINE MAINTENANCE
Malfunction
Important! In case of malfunction before calling the
Dealer for service, check that the power cord has
been perfectly inserted in the socket. Make sure that
there is electricity.
If, after making the suggested checks the blast
chiller still does not work, call the Dealer
communicating:
• data from the rating plate
• the date of purchase
• any alarm code visible on the display (eg.AL2)
Important! Do not attempt to repair or modify the
appliance in any of its parts, it could be potentially
dangerous and may invalidate the warranty; entrust
exclusively to qualified and authorized technicians.
INSTALLATION WARNINGS
This manual is part of the product, and provides all
the information necessary for proper installation and
maintenance.
It is compulsory that the user and installer
carefully read this manual and always refer to it;
the manual must also be kept in a known place
and accessible to all authorized operators
(installer, user, maintainer).
The blast chiller is intended only for the use for
which it was designed, that is for the blast
chilling/rapid freezing of foods. Any other use is
considered improper and potentially dangerous.
The manufacturer declines all responsibility and all
obligations of guarantee if damage occurs to the
appliance, to persons and property, attributable to:
• incorrect installation and/or that does not comply
the laws in force,
• modifications or operations not specific for the
model,
• use of non-original parts or not specific for the
model,
• failure to comply, even partially, with the
instructions in this manual,
• non-compliance, during installation, of the safety
rules and laws in force.
FOREWORD
The installation must be performed only by
authorized and specialized personnel, according
to the instructions and the requirements of this
manual.
Before installing the equipment, make sure that the
existing electrical systems are in compliance with
the law and suitable to the data of the nameplate of
the appliances to be installed (V, kW, Hz, No. of
phases and power available).
The installer must also check for any fire protection
requirements.
The manufacturer declares and associates, for each
machine, a declaration of compliance with
applicable regulations.
Installation rules
