11
Startup
The appliance is configured at the factory with preset values.
Warning: In case of power cut, all values will be lost and must be reset.
Before switching the appliance off, a thorough cleaning is necessary, following the instructions of the
"Maintenance and cleaning" section.
- Insert the plug in the electric socket.
- Press the ON key for a few seconds.
- Two minutes after switching the appliance on, the water circulation pump and the cooling system will
be activated.
Maintenance and Cleaning
• Always disconnect the appliance from the electric power supply before performing any maintenance or
cleaning operations.
• Regularly clean the appliance using a cloth and a solution of warm water, with some soft detergent,
suitable for cleaning the inside of the unit.
• Never use abrasive detergents.
• Do not use steam cleaners.
• The panel keys and display must not be cleaned using alcohol based substances or similar. Only use a
dry cloth.
Cleaning the internal tank
• Disconnect the appliance from the electric power supply and remove any left over ice cubes from the
tank.
• Clean using a damp cloth and a neutral detergent.
• Remove all limescale traces applying a specific limescale product. Give the product time to act and then
remove with a dry cloth.
