10
Settings
Warning:
before opening the settings menu ensure that the appliance is off.
The following parameters can be set
TIME
PROGRAMMING OF THE APPLIANCE
NUMBER OF ICE CUBES
ICE CUBE SIZE
LANGUAGE
Setting the time
Set the desired time using the program selection arrow (the hours will flash first, followed by the
minutes) and confirm the selection at each stage using the OK key.
Programming the appliance
When the appliance is switched on, it will automatically be set to the "Program disabled" option. To begin
the cycle start and end setting operation, select "program enabled" and press OK to confirm.
The cycle start and end times are set in the same way as the clock. The display can be used to enter the
time for appliance startup in the desired hh:mm format (the appliance will keep the last settings in the
memory). Press OK to return to the main menu. At the set start time the appliance will switch on and
operate until the set stop time.
IMPORTANT NOTE:
If the set cycle start and end times are before the current time shown on the clock, the settings will be
kept for the following day.
If the start time is before the time currently set on the clock, pressing OK to confirm will automatically
activate the appliance, which will continue operation until the set end time is reached.
Number of ice cubes
The appliance has 3 separate production modes:
- CONTINUOUS: the appliance will produce ice cubes until switched off or until the ice cube container
is full.
- 24: maximum allowed number of ice cubes, after which the appliance will be switched off.
- 48: maximum allowed number of ice cubes, after which the appliance will be switched off.
Ice cube size
This option can be selected to increase or decrease the size of the ice cubes based on personal needs.
To increase or decrease size use the arrows.
Language
To change the language select Menu - Language and then the desired language. Press OK to confirm.
First use
