581385
22
Zoom out
Zoom in
Previous page
1/37
Next page
Change the Side burner Orifices
1. Use a wrench to remove the side burner orifice brass
connector with flex line end to side burner tube.
A
5. Test all connections using an approved noncorrosive leak-
detection solution. Bubbles will show a leak. Correct any
leak found
A. Closed valve
B. Open valve
2. In the last page of the Use and Care Guide, write;
“Converted to Natural Gas.” Also record the conversion
date and the technician/company that performed the
conversion.
Note: Place LP gas parts in plastic parts bag for future use and
keep with pack containing literature.
1. The appliance nameplate is located inside the grill
cabinet on the left –hand cabinet side. With a
permanent marker, check the box next to “Natural
gas” and mark through “LP-Propane.”
Record Conversion
Adjust High Flame Setting Screw
When converting from LP to Natural gas, you will need to
6. Re-Attach the rear baffle and lock all removed screws.
A. Side burner flex end
2. Use 6 mm socket wrench or 6 mm nut driver to remove the
orifice. Replace with the Natural gas orifice.
A. Orifice
A
IMPORTANT:
Check that the orifice is properly installed inside of the valve.
3. Reinstall side burner, tighten the side burner orifice brass
connector and side burner tube by using a wrench.
4. Open the manual shutoff valve in the gas supply. Then
valve is open when the handle is parallel to the gas pipe.
2. Use a small precision flat-blade screwdriver to turn the
high flame set screw counter-clockwise, approximately 90
degrees.
When converting from LP to Natural gas, you will ne
ed to
adjust the high flame setting screw for ideal burner flame
height.
1. Remove each control knob for the main burners and side
burner
3. Check that burner operates at the new high flame setting. It
may be necessary to adjust the screw setting slightly more
to get the ideal burner flame height.
22
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for KitchenAid 730-0826 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of KitchenAid 730-0826 in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 2,88 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info