Manual Kicker sx 700 4 (page 13 of 20) (English)

167667

Zoom out

Zoom in

1/20

SX .4 Series Amplifiers

Operation

Phase MENU - Here you can switch the polarity of each

amplifier’s channel(s) output between 0 or 180 degrees. There

are two PHASE menus, one for AMP 1 and one for AMP 2. This

allows each amplifier to have its own individual PHASE setting.

Use the

UP and DOWN keys to

scroll through

AMP-1 and AMP-2 and

press the

ENT key to select the

amplifier you want to adjust.

Use the

UP and DOWN keys to

scroll through

BOTH, LEFT and right.

Press the

ENT to select the one you

want to adjust.

Now use the

UP and DOWNkeys

to select from

0 DEGREE or

180 DEGREE. Press the ESC to

return to the selected amplifier’s

PHASE menu.

When you are done adjusting the

selected amplifier’s phasing, press the

ESC key again to return to the

PHASE menu

AMP-1 / AMP- 2

options to select the other amplifier.

If done adjusting the phasing, press

the

ESC key again to return to the

MAIN menu

HOME

ENT

ESC

HOME

ENT

ESC

NOTE...

While adjusting the PHASE you will notice the

PHASE

indicator on the ISIS VFD display is lit. This indicates you

are in the PHASE menu.

The

AMP1 or AMP 2 indicator will light up to indicate which

amplifier you are currently adjusting.

There is also a

LEFT and a RIGHT indicator that will light up

to let you know which channel (Left and/or Right) that you are

currently adjusting.

HOME

ENT

ESC

HOME

ENT

ESC

HOME

ENT

ESC

SX .4 Series Amplifiers

Operation

hi-pass MENU - This menu is where you adjust the high

pass crossover for each amplifier. There are two HI-PASS

menus, one for AMP 1 and one for AMP 2. This allows each

amplifier to have its own individual HI-PASS setting.

Use the

UP and DOWN keys to

scroll through

AMP-1 and AMP-2 and

press the

ENT key to select the

amplifier you want to adjust.

Your options for each amplifier are

frequency and slop[e.Use the UP

and DOWN keys to choose one and

press the

ENT key to select it.

FREQUENCY selects the crossover point and can be set at any

1/12th octave frequency from 10 Hz to 16 kHz.

(

10 Hz to 16132 Hz)

Use the

UP and DOWN keys to

select your frequency. Press the

ESC

key to return to the selected

amplifier’s HI-PASS menu.

SLOPE selects the rolloff of the crossover and can be set

from

OFF to 36 dB in 6 dB steps.

Use the

UP and DOWN keys to

select your slope. Press the

ESC

to return to the selected amplifier’s

HI-PASS menu.

When you are done adjusting the

selected amplifier’s HI-PASS crossover

press the

ESC key to return to the

HI-PASS menu

AMP-1 / AMP-2 options

to select the other amplifier.

If done adjusting the HI-PASS

crossover, press the

ESC key again

to return to the MAIN menu

NOTE...

While adjusting the HI-PASS crossover you will

notice the

hpf indicator on the ISIS VFD display is

lit. This indicates you are in the HI-PASS crossover menu.

The

AMP1 or AMP 2 indicator will light up to indicate which

amplifier you are currently adjusting.

The KICKER SX amplifier monitors and prevents any high

pass crossover point from being any closer than 1/3 octave

from the low pass crossover point. If you cannot set the high

pass crossover where you want then check the

LPF indicator

and see if it is flashing. If it is then you need to go to the

LO-PASS menu and lower the low pass crossover point.

This is done as a safety precaution to prevent a notch

filter condition.

HOME

ENT

ESC

HOME

ENT

ESC

HOME

ENT

ESC

HOME

ENT

ESC

HOME

ENT

ESC

HOME

ENT

ESC

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Kicker sx 700 4 in the language / languages: English as an attachment in your email.

The manual is 1,96 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Kicker sx 700 4 Manual

Product: