Manual Kicker sx 700 4 (page 12 of 20) (English)

167667

Zoom out

Zoom in

1/20

SX .4 Series Amplifiers

Operation

Lo-Pass MENU - This menu is where you adjust the low pass

crossover for each amplifier. There are two LO-PASS menus,

one for AMP 1 and one for AMP 2. This allows each amplifier

to have its own individual LO-PASS

setting.

Use the

UP and DOWN keys to

scroll through

AMP-1 and AMP-2 and

press the

ENT key to select the

amplifier you want to adjust.

Your options for each amplifier are

frequency and slop[e.Use the UP

and DOWN keys to choose one and

press the

ENT key to select it.

FREQUENCY selects the crossover point and can be set at any

1/12th octave frequency from 30 Hz to 20 kHz.

(

30 Hz to 20325 Hz)

Use the

UP and DOWN keys to

select your frequency. Press the

ESC to return to the selected

amplifier’s LO-PASS menu.

SLOPE selects the rolloff of the crossover and can be set

from

oFF to 36 dB in 6 dB steps.

Use the

UP and DOWN keys to

select your slope. Press the

ESC to

return to the selected amplifier’s

LO-PASS menu.

When you are done adjusting the

selected amplifier’s LO-PASS crossover

press the

ESC key to return to the

LO-PASS menu

AMP-1 / AMP-2 options

to select the other amplifier.

If done adjusting the LO-PASS

crossover, press the

ESC key again

to return to the MAIN menu

NOTE...

While adjusting the LO-PASS crossover you will notice the

LPF indicator on the ISIS VFD display is lit. This indicates

you are in the LO-PASS crossover menu.

The

AMP1 or AMP 2 indicator will light up to indicate which

amplifier you are currently adjusting.

The KICKER SX amplifier monitors and prevents any low pass

crossover point from being any closer than 1/3 octave from

the high pass crossover point. If you cannot set the low pass

crossover where you want then check the

HPF indicator and

see if it is flashing. If it is then you need to go to the HI-PASS

menu and raise the high pass crossover point.

This is done as a safety precaution to prevent a notch filter

condition.

HOME

ENT

ESC

HOME

ENT

ESC

HOME

ENT

ESC

HOME

ENT

ESC

HOME

ENT

ESC

HOME

ENT

ESC

Use the UP and DOWN keys to

select your Q value. Press the

ESC

to return to the selected amplifier’s

EQ menu.

BOOST/CUT is how much you want to boost or cut the

equalizer and has a range of

-18 dB to + 18 dB in .5 dB

steps.

Use the

UP and DOWN keys to

adjust each setting and the

ESC

key to return to the selected

amplifier’s EQ menu.

When you are done adjusting the

selected amplifier’s EQ press the

ESC key to return to the EQ menu

AMP-1 / AMP-2 options to select the

other amplifier.

If done adjusting the EQ, press the

ESC key again to return to the MAIN

NOTE...

While adjusting the EQ you will notice the

EQ indicator on

the ISIS VFD display is lit. This indicates you are in the EQ

menu.

The

AMP1 or AMP 2 indicator will light up to indicate which

amplifier you are currently adjusting.

SX .4 Series Amplifiers

Operation

EQ MENU - This menu is where you adjust the single band

parametric equalizer for each amplifier. There are two EQ

menus, one for AMP 1 and one for AMP 2. This allows each

amplifier to have its own individual EQ setting.

Use the

UP and DOWN keys to

scroll through

AMP-1 and AMP-2 and

press the

ENT key to select the

amplifier you want to adjust.

Your options for each amplifier are

frequency, bandwidth and

boost/cut. Use the UP and DOWN

keys to choose one and press the

ENT key to select it.

FREQUENCY selects the center frequency of the EQ and can

be set at any 1/12th octave frequency from 20 Hz - 20 kHz.

(

20 Hz to 20325 Hz)

Use the

UP and DOWN keys to

select your frequency. Press the

ESC to return to the selected

amplifiers EQ menu.

BANDWIDTH (better known as Q) can be set from .5 to 10 in

.5 increments. In simple terms, lower Q effects more

frequencies around the center frequency while higher Q

effects fewer frequencies around the center frequency.

HOME

ENT

ESC

HOME

ENT

ESC

HOME

ENT

ESC

HOME

ENT

ESC

HOME

ENT

ESC

HOME

ENT

ESC

HOME

ENT

ESC

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Kicker sx 700 4 in the language / languages: English as an attachment in your email.

The manual is 1,96 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Kicker sx 700 4 Manual

Product: