813921
3
Zoom out
Zoom in
Previous page
1/24
Next page
Installation and operation manual“
3
1 Construction of the stoves
1.1 Placement of the stove
Ventilation: To allow proper operation, verify that the oxygen equired for combustion can be
obtained in sufficient quantity in the place where it is to install the appliance.
Location of appliance: Choose a central location in the room that favors a good distribution.
Ensure that there aren't made or coated with materials that are flammable or degrade with
heat effect (wallpaper, carpet, light closures based on plastics, etc.)
Not allowed the installation of the stove in bedrooms or bathrooms neither in places
that has been already installed other heating appliance or a fume extraction system
without an independent air intake (kitchen extractor, fireplace, stove, etc.).
It is forbidden to place the fireplace in explosive environments.
With wooden floors, provide for protection of the soil surface in accordance with the
rules in force in the country.
1.2 Preparation and unpacking
When you unpack the fireplace, check for perfect operation, as well as the possible
presence of shipping damage. Any anomalies must be immediately reported to the
transport carrier or seller.
Check the accordance with what is provided.
The chimney must always move in VERTICAL position
The glass is fragile, it's necessary to protect it.
If possible, unpack the fireplace near the area where you will install it.
1.3 General assembly rules
The appliance must always lean on a structure which support the weight and leave at
least 5 cm air gap between the chimney and walls
If the chimney is placed on a floor or near combustible walls, a proper insulation is
recommended.
1.4 Assembly of cladding
The fireplace and the parts of the cladding must be attached together WITHOUT ANY
CONTACT WITH STEEL STRUCTURE to prevent heat transmission to the coating and allow
thermal expansions. Beware of wood finishes such as beams or shelves, which must be
properly insulated.
In particular, the shelves should be placed at a distance upper to 30 cm from the top of the
appliance.
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for KFD STO MAX 7 3F at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of KFD STO MAX 7 3F in the language / languages: English as an attachment in your email.

The manual is 1.22 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info