562625
17
Zoom out
Zoom in
Previous page
1/55
Next page
32 33
BREWER SHUTS OFF OR TURNS ON AUTOMATICALLY
• Check to make sure that the AUTO ON/OFF settings have not been set (refer to page 20).
• The water level is low and a full cup cannot be brewed. Add water to the Water Reservoir.
THE TOUCHSCREEN INDICATES “MORE WATER PLEASE.
• If the water level is not low, remove the Water Reservoir and empty the water. Then
thoroughly clean (refer to page 23). Fill the Water Reservoir to the MAX FILL line, return it
to the brewer and ensure it is seated properly in its base.
THE TIME IS NOT DISPLAYED ON THE TOUCHSCREEN
• If power is interrupted to the brewer by unplugging it, or if power is lost, follow the
procedure on page 19 to set the CLOCK.
THE K-CUP
®
PACK HAS A KEURIG
®
LOGO, BUT TOUCHSCREEN INDICATES “OOPS!”
• Your Keurig
®
2.0 brewer will not work with packs that don’t have the Keurig
®
logo
on them. Some Keurig
®
brand packs produced prior to January 2014 may not be
enabled to work with the Keurig
®
2.0 brewer. Please contact Customer Service at
1.866.901.BREW (2739) for a solution.
STILL HAVING TROUBLE? VISIT KEURIG.COM FOR MORE INFORMATION.
BREWER DOES NOT HAVE POWER
• Plug the brewer into an independent outlet without dimmer control.
• Check to be sure that the brewer is plugged in securely.
• Plug the brewer into a different outlet.
• Reset your home’s circuit breaker if necessary.
• Press and hold the Power Button and ensure the Touchscreen is illuminated.
BREWER WILL NOT BREW
• After placing a pack in the Pack Holder, make sure the Handle is lowered completely and
the Touchscreen displays the appropriate brew screen. Follow the brewing instructions
in SECTION 1 (refer to pages 10 11).
• If the Touchscreen indicates “More Water Please.” add water to the Water Reservoir or
make sure the Water Reservoir is seated properly in its base.
• If the Touchscreen indicates “More Water Please.” even after refilling, remove the Water
Reservoir and empty the water. Then thoroughly clean (refer to page 23). Fill the Water
Reservoir to the MAX FILL line, return it to the brewer and ensure it is seated properly in
its base.
• The Pack Holder may need to be cleaned (refer to pages 24 25) or the brewer may
need to be descaled (refer to pages 28 30).
• If you have completed the above procedure two times and this situation persists,
contact Customer Service at 1.866.901.BREW (2739).
BREWER BREWS ONLY A PARTIAL CUP
• Clean the Pack Holder if necessary (refer to pages 24 25).
• The Water Reservoir may have been removed during brewing. Replace the Water
Reservoir and perform a cleansing brew (refer to page 9) without a pack.
• Descale the brewer (refer to pages 28 30).
• If you have repeated the descale procedure on your brewer two times and it is still only
brewing a partial cup, contact Customer Service at 1.866.901.BREW (2739).
TROUBLESHOOTING
SECTION 3
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Keurig 2.0 K550 Brewer at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Keurig 2.0 K550 Brewer in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 3,56 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info