635287

Kettler Verso TX1 - 7882-099 Manual

29
Zoom out
Zoom in
Previous page
1/42
Next page
28
Owner’s Manual
CLEANING
Remove dust on the treadmill with vacuum or slightly damp cloth. Fold up the deck and clean
the floor with vacuum periodically will help to prolong the treadmill product life.
NEVER use solvents on the deck or running belt. Use of solvents can reduce critical lubrication
of the deck and belt.
RUNNING BELT CENTERING ADJUSTMENT:
When you run or walk, you may push off harder with one foot than the other. This will cause the
running belt to run off center. This treadmill is designed and built to ensure proper tracking of the
belt is always centered on the deck. Occasionally the belt may need further adjustment to keep it
centered. To center the belt, use the enclosed Allen wrench to adjust the rear roller position.
BELT CENTERING PROCEDURES:
1. DO NOT wear loose clothing, neckties or loose jewelry while making this adjustment.
2. NEVER turn the bolt more than 1/4 turn at a time.
3. Always tighten one side and loosen the other to prevent over tightening or over loosening the
belt.
4. Run the treadmill. Adjust belt while the treadmill is running at 4 Mi/H (6.4 Km/H) with no
person on the belt.
After making the adjustment, walk on the belt for five minutes to test. If necessary, repeat the
procedure but NEVER turn the bolts more than 1/4 turn at a time. Over tightening the belt can
significantly shorten the belt life.
IF BELT TOO FAR TO THE LEFT SIDE:
1. Turn the left roller bolt 1/4 turn clockwise (tighten)
2. Turn the right roller bolt 1/4 turn counterclockwise (loosen)
IF BELT TOO FAR TO THE RIGHT SIDE:
1. Turn the right roller bolt 1/4 turn clockwise (tighten)
2. Turn the left roller bolt 1/4 turn counterclockwise (loosen)
RUNNING BELT TENSIONING ADJUSTMENT:
If you place your feet on the belt and feel a slipping sensation, then the belt has stretched and is
slipping across the rollers. All belts will stretch over time. This is a normal and common
DANGER!
To reduce the risk of
electrical shock, always
unplug the treadmill
from the electrical outlet
immediately after use
and before cleaning.
CAUTION!
Over tightening of the
belt will severely shorten
the life of the belt and
may cause further
damage to other
components.
… 29 …


Need help? Post your question in this forum.

Forumrules
1

Forum

kettler-verso-tx1---7882-099

Reset search

  • I have a Kettler tx1 and it’s stuck on error code 4, how do I resolve this issue? Please Submitted on 3-5-2018 at 09:58

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kettler Verso TX1 - 7882-099 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kettler Verso TX1 - 7882-099 in the language / languages: English as an attachment in your email.

The manual is 1,42 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info