772982
46
Zoom out
Zoom in
Previous page
1/82
Next page
MY20K10-02_1.0_10.11.2020 46
Operation
6.13 Electric drive system
6.13.1 Switching on the electric drive
system
A sufficiently charged battery has been inserted
into the S pedelec.
The battery is firmly positioned. The key has been
removed.
Press on the On-Off button (battery) to wake
the battery up from sleep mode.
Press the On-Off button (control panel) for
about one second.
The initialisation process is completed after
about five seconds and the display shows the
trip screen.
The S pedelec is ready for use.
6.13.2 Switching off the electric drive
system
Press the On-Off button (control panel) on the
control panel for about 1 second.
The display and drive system are switched off.
You will not cause any damage if the screen is
removed without switching off the system.
6.13.3 Placing the battery in sleep mode
1Press the On-Off button (battery) down for
more than 5 seconds.
The LEDs will go off one by one.
2When the last LED has gone out, press the
On-Off button (battery) for about 2–3 seconds
more.
The battery will go into sleep mode in the next
60 seconds.
6.13.4 Waking the battery up from sleep
mode
1Press the On-Off button (battery) briefly.
All 5 LEDs will go on initially, followed by a brief
pause, after which all LEDs will flash briefly
three times. The battery is ready to operate
again.
Crash caused by lack of readiness for braking
When it is switched on, the drive system can be
activated by the application of force on the
pedals. There is a risk of a crash if the drive is
activated unintentionally and the brake is not
reached.
Never start the electric drive system, or switch
it off immediately, if the brake cannot be
reached safely and reliably.
CAUTION
!
Notice
The battery is automatically placed in sleep
mode if it is not used (display switched off, the
battery button not pressed). When the battery
is in this state, the standby power consumption
is reduced to a minimum, thus allowing longer
storage periods without major loss of capacity,
for example.
46


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kettler Velossi 2.0 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kettler Velossi 2.0 in the language / languages: English as an attachment in your email.

The manual is 7.33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kettler Velossi 2.0

Kettler Velossi 2.0 User Manual - German - 83 pages

Kettler Velossi 2.0 User Manual - Dutch - 82 pages

Kettler Velossi 2.0 User Manual - French - 84 pages

Kettler Velossi 2.0 User Manual - Spanish - 85 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info