772982
42
Zoom out
Zoom in
Previous page
1/82
Next page
MY20K10-02_1.0_10.11.2020 42
Operation
6.8 Before each ride 6.9 Check list before each ride
Check the S pedelec before each ride.
Take the S pedelec out of service if you spot
any anomalies.
Crash caused by difficult-to-spot damage
If the S pedelec topples over or you have a fall or
an accident, there may be difficult-to-spot
damage to components such as the brake
system, quick releases or the frame. This may
cause a crash with injuries.
Take the S pedelec out of service and have a
specialist dealer carry out an inspection.
Crash caused by material fatigue
Intensive use can cause material fatigue. A
component may suddenly fail in case of material
fatigue. This may cause a crash with injuries.
Remove the S pedelec from service
immediately if there are any signs of material
fatigue. Have the specialist dealer check the
state.
Have the specialist dealer carry out a basic
inspection regularly. During the inspection, the
specialist dealer will inspect the S pedelec for
any signs of material fatigue on the frame,
fork, suspension element mountings (if there
are any) and components made of composite
materials.
Carbon becomes brittle when exposed to heat
radiation such as heating. This can cause the
carbon part to break and result in a crash with
injuries.
Never expose carbon parts on the S pedelec
to strong sources of heat.
CAUTION
!
Check that the S pedelec is complete.
Check the hydraulic fluid level on the brake handle.
Check the battery is firmly in place.
Check that the lighting, reflector and brake, for instance,
are sufficiently clean.
You must check that the mudguards, the pannier rack and
the chain guard are securely installed.
Check that the front and rear wheels run true. This is
particularly important if the S pedelec has been transported
or secured with a lock.
Check the valves and the tyre pressure. Adjust as
necessary before each ride.
If the S pedelec has a hydraulic rim brake, check whether
the locking levers are fully closed in their final positions.
Check the front and rear wheel brakes to make sure that
they are working properly. To do so, push the brake levers
while stationary to check whether resistance is generated
in the usual brake lever position. The brake must not lose
any brake fluid.
Check that the riding light is working.
Check for unusual noises, vibrations, smells, staining,
deformation, cracks, scores, abrasion and wear. This
indicates material fatigue.
Inspect suspension system for cracks, dents, bumps, parts
or leaking oil. Look at concealed sections on the
S pedelec's lower surface.
Use body weight to compress suspension system. Adjust to
the optimum sag value if suspension is too soft.
If quick releases are used check them to make sure that
they are fully closed in their end position. If quick release
axle systems are used, make sure that all attachment
screws are tightened to the correct torque.
Be alert to any unusual operating sensations when braking,
pedalling or steering.
Check that the ABS indicator lamp lights up correctly on
S pedelec with an ABS system.
42


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kettler Velossi 2.0 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kettler Velossi 2.0 in the language / languages: English as an attachment in your email.

The manual is 7.33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kettler Velossi 2.0

Kettler Velossi 2.0 User Manual - German - 83 pages

Kettler Velossi 2.0 User Manual - Dutch - 82 pages

Kettler Velossi 2.0 User Manual - French - 84 pages

Kettler Velossi 2.0 User Manual - Spanish - 85 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info