772982
40
Zoom out
Zoom in
Previous page
1/82
Next page
MY20K10-02_1.0_10.11.2020 40
Operation
2Pump air suspension fork to the required
pressure. Observe the levels in the Suntour
filling pressure table. Never exceed the
recommended maximum air pressure.
3Detach high-pressure damper pump.
4Measure the distance between the crown and
the dust seal. This distance is total deflection
of the fork.
5Push a temporarily attached cable tie
downward against the dust seal.
6Put on your normal cycling clothing, including
luggage.
7Sit on the S pedelec in your usual riding
position and support yourself against an
object, such as a wall or tree.
8Get off the S pedelec without allowing it to
deflect.
9Measure distance between the dust seal and
the cable tie.
This measurement is the negative deflection.
The recommended value is between 15%
(hard) and 30% (soft) of the total fork
deflection.
10 Increase or reduce air pressure until you have
reached the desired negative deflection.
If the negative deflection is correct, turn the
valve cap in a clockwise direction.
If you are unable to achieve the desired
negative deflection, an internal adjustment
may be needed. Contact your specialist dealer.
6.6.5.4 Adjusting the air suspension fork
rebound
The rebound setting depends on the negative
deflection setting: A higher negative deflection
requires a lower rebound setting.
1Turn the Suntour rebound screw in a
clockwise direction to the closed position until
it stops.
Figure 31: Suntour rebound screw (2), fork (1)
2Turn the Suntour rebound screw slightly in an
anti-clockwise direction.
3Adjust the rebound in such a way that the fork
rebounds quickly, but without bottoming out
upward. Bottoming out refers to when the fork
rebounds too quickly and stops moving
abruptly once it has reached the full rebound
distance. You can hear and feel a slight impact
when this happens.
Rider weight Mobie 45 air
< 55 kg 35 - 50 psi
55 - 65 kg 50 - 60 psi
65 - 75 g 60 - 70 psi
75 - 85 kg 70 - 85 psi
85 - 95 kg 85 - 100 psi
< 95 kg + 105 psi
Pressure on delivery 90 psi
Maximum air
pressure
120 psi
Table 18: Suntour filling pressure table for air forks
1
2
40


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kettler Velossi 2.0 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kettler Velossi 2.0 in the language / languages: English as an attachment in your email.

The manual is 7.33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kettler Velossi 2.0

Kettler Velossi 2.0 User Manual - German - 83 pages

Kettler Velossi 2.0 User Manual - Dutch - 82 pages

Kettler Velossi 2.0 User Manual - French - 84 pages

Kettler Velossi 2.0 User Manual - Spanish - 85 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info