Manual Kettler Track Motion 07881-300 (page 18 of 92) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Spanish)

493309

Zoom out

Zoom in

1/92

control programs.

1. Switch on the device.

2. Attach the safety key to the treadmill and the clip to the clothes

of the user.

3. Select the “P6: HRC Speed Program” with the cursor buttons

and confirm with Enter

4. Confirm (Enter) or change (Cursors buttons) the age input

5. Confirm (Enter) or change (Cursors buttons) the time input

6. Confirm (Enter) or change (Cursors buttons) the maximum tar-

get pulse

7. Confirm with Enter to begin the training.

8. The training can be interrupted at any time by pressing the

STOP button. A restart of the training is possible during the first

3 minutes.

P6: Pulse Profile

Note for Heart Control Programs:

If the heart rate is not detected, due to safety reasons the speed

will be limited to 1km/h(metric), 0.6MPH(English).

SYSTEM CHANGEOVER

The menu items for Unit (metric/English), LCD and Controller Ver-

sion, Total Running Time, Total Running Performance, Buzzer

(ON/OFF) and Stand-by Time can be adjusted individually. The

LCD and Controller Version, Total Running Time and Total Running

Performance can only be read but not edited.

To be able to carry out a system changeover you must be in the pro-

gram selection.

Press the SPEED button (-) for at least 2 sec. to enter the system

changeover menu.

You can leave the adjustment mode without any changes at any

time by using the STOP button.

You can navigate through further menu points by pressing the but-

tons SPEED (-) or SPEED (+).

1) Change between the metrical and the English System-

The display shows “UNIT”.

Press START to change between KM and MI.

Press STOP to confirm and leave the menu.

Die unit of measurement for speed and distance will be changed

correspondingly.

2) Read LCD and Controller Version

3) Reading the total running time in hours

4) Reading the total running performance (km or miles))

5) Switch buzzer on/off.

Simply press START to turn the buzzer on or off.

The display then changes in the program selection mode.

6) Adjust time for stand-by

Press START and adjust the switch off time by using the buttons

Speed (+) or Speed (-).

Pressing START again will confirm the value.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Kettler Track Motion 07881-300 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Spanish as an attachment in your email.

The manual is 1,23 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kettler Track Motion 07881-300

Kettler Track Motion 07881-300 Installation Guide - English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Spanish - 40 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Kettler Track Motion 07881-300 Manual

Product: