Manual Kettler Run 1 - 07888-500 (page 10 of 84) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Spanish)

736638

Zoom out

Zoom in

1/84

Information for your safety:

• To avoid injuries as a result of overstress or overload, the

exercise device shall only be operated according to the

instructions.

• Prior to the first commissioning and after approx. 6 opera-

ting days, check if the connections are mechanically secu-

red.

• Regularly check the operability and the proper condition of

the exercising device.

• The safety technical controls are part of the obligations of

the owner and shall be implemented regularly and pro-

perly.

• The security level of the device can only be maintained if

the device is regularly checked for wear and damages.

• Defective or damaged components shall be replaced imme-

diately. Works on the electrical components shall only be

implemented by qualified staff. Only use KETTLER original

spare parts.

• Until repair the device shall no longer be used.

• For care, cleaning and maintenance only use the KETTLER

Device-Care-Set Art.-No. 7921-000

• Please clarify with your general practitioner before you start

the training, whether or not your health conditions allow

you to train with this device. The medical result shall be the

basis for the elaboration of your training program. Wrong

or excessive training can lead to health impairments.

• The treadmill shall only be implemented for its intended pur-

pose, i.e. the walking and running exercise of adults.

• Please consider the maximum user weight.

• Only exercise with attached security key.

• Start the first training units at low speed to make yourself

familiar with the new motion sequences.

• When feeling insecure, grab hold of the handle bars, leave

the treadmill over the side platforms and stop the belt.

Important: Please also note the safety guidelines in the installati-

on and assembly instruction.

Safety Switch

• Prior to every training unit, insert the safety key into the

safety switch and attach the string of the safety key to your

clothes. Adapt the length of the string: When “stumbling”

the safety switch shall be released.

• The safety switch was developed to immediately shut down

the drives for the belt and the height adjustment in case you

fall or for emergency situations. Only use the safety switch

for emergency stops. To stop the treadmill during normal

training in a safe, comfortable and proper way under nor-

mal conditions, use the STOP button.

• Check the safety switch prior to the begin of your exercises

• Position yourself on the side platforms and start the belt at

normal speed. Remove the safety key from the safety

switch. The belt must stop immediately. Afterwards reattach

the safety key to the safety switch and the string to your clo-

thes. When the belt is stopped, move backwards. The

safety key must detach from the safety switch. However the

string shall remain attached to the clothes. Afterwards

reattach the safety key back to the safety switch.

Treadmill protection

• By removing the safety key an unauthorised use of the

treadmill through third parties can be avoided. Please keep

the safety key in a safe place and avoid children to get

hold of the safety key.

SAFETY GUIDELINES

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Kettler Run 1 - 07888-500 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Spanish as an attachment in your email.

The manual is 3,06 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kettler Run 1 - 07888-500

Kettler Run 1 - 07888-500 Installation Guide - English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Spanish - 36 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Kettler Run 1 - 07888-500 Manual

Product: