Manual Kettler ROWER H2O - RO1029-100 (page 18 of 24) (English)

736122

Zoom out

Zoom in

1/24

Velcro facing

upward

Begin reattaching the ROWER Belt by

threading around the ROWER Belt Pulley

with the Velcro side facing upward as

illustrated.

Idle Wheel

Next, thread the Belt around the Idle Wheel

as shown. Once around the Idle Wheel,

attach the ROWER Belt to the Belt/Bungee

Pulley. The re is an obvious “lip” at the

attachment point.

WAVE ROWER

Belt/Bungee Pulley

Reattaching the WAVE ROWER Belt

Wind the ROWER Belt onto the Belt/

Bungee Pulley until the ROWER Handle is

as it’s furthest forward position.

If Bungee Shock Cords previous tension

seemed correct (a good way to judge is if

the WAVE ROWER Handle can make it to the

furthest point forward on the top of the

Main Frame under bungee tension alone) the

n simply tie off at previous position. If the

return is too slack, experiment by tightening

the tension in small increments and testing

until the correct tension is achieved. If the

WAVE ROWER Handle cannot reach the end

of the seat rail during a rowing stroke, then

the Bungee Shock Cord is over-tensioned.

Hint

Bungee Pulley

Bungee Shock Cord

Rethread the Bungee Shock Cord (on opposite

side of the Idle Wheel) back through the

Bungee Pulleys and tie off at the Attachment

Point.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Kettler ROWER H2O - RO1029-100 in the language / languages: English as an attachment in your email.

The manual is 5,2 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Kettler ROWER H2O - RO1029-100 Manual

Product: