Manual Kettler Kinetic S3 - 7881-000 (page 6 of 48) (English, German, Dutch, French, Italian, Polish, Spanish)

736559

Zoom out

Zoom in

1/48

Assembly Instructions

Running Tip: Running straight on the treadmill is made

easier by focussin on a fixed oject in front of you in the

room. Rus as if you wanted to approach the object.

Importantly: Please keep the safety key in a safe place

and ensure that it is kept out of reach of children!

Care and Maintenance

 Do no use corrosive or abrasive materials to clean the

equipment. Ensure that such materials are not

allowed to pollute the environment.

 The electrical elements and components do not

require special maintenance. No alterations or repairs

(except maintenance checks) should be made to these

parts unless by a qualified electrician.

 When ordering spare parts, always state the full article

number, spare-part number, the quantity required and the

serial number of the product.

Example order: item no. 7881-000 / spare-part no.

68001000 / 1 pieces /serial no......

Important: spare part prices do not include fastening

material; if fastening material (bolts, nuts, washers etc.) is

required, this should be clearly stated on the order by

adding the words „with fastening material“.

Instructions for Assembly

 Ensure that you have received all the parts required

(see check list) and that they are undamaged. Should

you have any cause for complaint, please contact your

KETTLER dealer.

 Before assembling the equipment, study the drawings

carefully and carry out the operations in the order

shown by the diagrams. The correct sequence is

given in capital letters.

 The equipment must be assembled with due care by

an adult person. If in doubt call upon the help of a

second person, if possible technically talented.

 Please note that there is always a danger of injury

when working with tools or doing manual work.

Therefore please be careful when assembling this

machine.

Ensure that your working area is free of possible sources of

danger, for example don’t leave any tools lying around.

Always dispose packaging material in such a way that it

may not cause any danger. There is always a risk of

suffocation if children play with plastic bags!

 The fastening material required for each assembly

step is shown in the diagram inset. Use the fastening

material exactly as instructed. The required tools are

supplied with the equipment.

 Bolt all the parts together loosely at first, and check

that they have been assembled correctly. Then use

spanner to finally tighten screws/nuts.

 Please keep original packaging of this article, so that

it may be used for transport at a later date, if

necessary.

For technical reasons, we reserve the right to carry out

preliminary assembly work (e.g. addition of tubing plugs).

Handling

Belt adjustment:

The running belt has been adjusted properly at the factory.

However transportation, uneven flooring or other

unpredicted reasons could cause the belt to shift off center.

First unplug the power cord from the surge protector.

If the belt moves to the left:

Using the hex key provided, turn the left rear roller

adjustment bolt 1/4 turn in the clockwise direction. Plug the

power cord back into the surge protector and run the

treadmill at 4 km/h. You should see the belt start to correct

itself, moving back toward the center. Repeat the above

procedure until the walking belt is centered.

If the belt moves to the right:

Using the hex key provided, turn the right rear roller

adjustment bolt 1/4 turn in the clockwise direction. Plug

the power cord back into the surge protector and run the

treadmill at 4 km/h. You should see the belt start to

correct itself, moving back toward the center. Repeat the

above procedure until the walking belt is centered. It may

be necessary to set walking belt tension once you have

completed this procedure if the belt feels like it is slipping

while walking. Refer below to the "Belt straightening"

instructions.

Belt straightening:

First unplug the power cord from the surge protector.

Using the hex key provided, turn both the left and right

rear roller adjustment bolts the same distance, usually a

1/4 turn in the clockwise direction. Plug the power cord

back into the surge protector and run the treadmill at 4

km/h. You should now walk on the belt to determine if the

belt is still slipping. Repeat the above procedure until the

walking belt is not slipping. Be very careful when

adjusting and straightening the belt. An extreme over

or under tension may damage the running belt! The

tension should be just tight enough not to slip.

KETTLER Ltd. • KETTLER House, Merse Road • North Moons Moat • Redditch, Worchestershire • B 98 9 HL • Great Britan

KETTLER International Inc. • P.O. Box 2747 • VA 23450 USA

www.kettler.de

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Kettler Kinetic S3 - 7881-000 in the language / languages: English, German, Dutch, French, Italian, Polish, Spanish as an attachment in your email.

The manual is 15,88 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kettler Kinetic S3 - 7881-000

Kettler Kinetic S3 - 7881-000 User Manual - English, German, Dutch, French, Italian, Polish, Spanish - 75 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Kettler Kinetic S3 - 7881-000 Manual

Product: