Manual Kettler Kinetic S3 - 7881-000 (page 5 of 48) (English, German, Dutch, French, Italian, Polish, Spanish)

736559

Zoom out

Zoom in

1/48

Assembly Instructions

All KETTLER products are designed in accordance with the latest safety regulations and undergo a constant

process of quality control during manufacturing. The knowledge gained in this process is used to constantly

imporve and develop our products. In order to offer our customers the very best in product quality, we reserve

the right to make technical changes at any time. In spite of this, should you have any cause for complaint,

please contact your KETTLER dealer.

For Your Safety

 The running belt should be used only for its intended

purpose, i.e. for physical exercise (walking and

jogging) by one (1) adult persons. Any other use of the

equipment is prohibited and may be dangerous. The

manufacturer cannnot be held liable for damage or

injury caused by imporper use of the equipment.

 Damaged components may endanger your safety or

reduce the lifetime of the equipment. For this reason,

worn or damaged parts should be replaced

immediately and the equipment taken out of use until

this has been done. Use only original KETTLER spare

parts.

 The running belt has been designed in accordance

with the latest standards of safety. Incorrect repairs

and structural modifications (e.g. removal or

replacement of original parts) may endanger the safety

of the user.

 The running belt must be set up on firm even ground.

Ensure that the power cable is not pinched and that

no-one can trip over it.

 Always ensure that the space under the running

belt is kept free, i.e. that there are no objects, pets

etc. beneath it.

 Never touch the moving belt with your hands. Also

ensure that there are no objects close to the belt or the

rollers which could be pulled into it thus causing

injury or damaging the unit itself.

 The running belt is not suitable for use by persons

weighing over 160kg.

 The unit should be positioned in such a way that there

is a space of 100cm on both side and 200cm behind it.

 The unit requires a power supply of 220-230V / 50Hz.

It should be connected only to an earthed safety

socket with a single 16-A fuse. Do not under any

circumstances carry out electrial repairs or

alterations yourself. Always ensure that such

work is done by a proberly qualified electrician.

 Do not use a multiple power socket for the running

belt. If an extension cable is being used, ensure that it

complies with the VDE regulations.

 When the unit is not in use, unplug it from the power

supply.

Handeling the equipment

 Standards:

The device has been tested in accordance with DIN EN

957-6 Class SB and is also suitable for industrial use.

It is unsuitable for therapeutic use.

 Before using the equipment for exercise, check

carefully to ensure that it has been correctly

assembled and checked.

 Usage of the equipment in damp rooms is not

permitted. Please ensure that no part of the machine

comes in contact with liquid (drinks, perspiration etc.).

This may cause corrosion.

 The running belt is designed for use by adults and

children should not be allowed to play with it. Children

at play behave unpredictalby and dangerous situations

may occur for which the manufacturer cannnot be held

liable. If, in spite of this, children are allowed to use

the equipment, ensure that they are instructed in its

proper use and are supervised accordingly.

 To ensure that the safety level is kept to the highest

possible standard, determined by its construction, this

product should be serviced regulary (once a year) by

specialist retailers.

 Before carrying out cleaning or maintenance work,

always disconnect the running belt from the power

supply (i.e. pull the plug out of the socket).

 Please ensure that liquids or perspiration never

enter the machine or electronics.

 Repairs on the electrical components in the unit should

be carried out by qualified persons only.

 Always observe the general safety rules and

precautions for working with electrical equipment.

 All electric applicances emit electromagnetic radiation

when in operation. Please do not leave especially

radiation-intensive appliances (e.g. mobile telephones)

directly next to the cockpit or the electronic

controlsystem as otherwise values displayed might be

distorted (e.g. pulse measurement).

 Prior to training attach the cord of the running belt

stop trip to your clothing.

 The KETTLER treadmill has an emergenty stop

mechanism for your safety. Before starting your

workout, fasten the cord of the safety key to your

clothing. If the treadmill has been shut down by

removing the safety key, restart it by reinserting

the key. An automatic restart of the treadmill belt

does not occur. Further instructions concerning the

handleing fo the safty cut-out can be found in the

operating instrucitons for the training computer.

 An unmonitered use of the treadmill by other people

can be prevented by removing the safety key and

keeping it safely hidden.

 In case of any emergency, hold on tightly to the

handrail with both hands and leave the treadmill by

means of the antislipping surface of the lateral

platofrm. Activate the emergence stop mechanism

(safety cut-out).

 Any interface with parts of the product that are not

described within the manual may cause damage,

or endanger the person using this machine.

Extensive repairs must only be carried out by

KETTLER service staff or qualified personnel

trained by KETTLER.

 Should you be in any doubt, please consult your

dealer.

 Always wear suitable shoes (running shoes) when

using the running belt.

 Before beginning your first training session, familiarize

yourself throughly with all the functions and settings of

the unit.

 If the equipment is in regular use, check all its

components throughly at appropriate intervals. Pay

particular attention to the tightness of bolts and nuts.

 In case of a regular use of the running belt, the cold

running belt has to be serviced with silicone oil.

 Depending on the degree of use and load to which the

unit is subjected, the belt may tend to stretch or slip.

Tighten the belt as described. Adjust the tightness of

the belt as describe in section „handeling“.

 Observer the movement of the edge of the belt when it

is in use. If it tends to run towards the side, readjust it

accordingly.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Kettler Kinetic S3 - 7881-000 in the language / languages: English, German, Dutch, French, Italian, Polish, Spanish as an attachment in your email.

The manual is 15,88 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kettler Kinetic S3 - 7881-000

Kettler Kinetic S3 - 7881-000 User Manual - English, German, Dutch, French, Italian, Polish, Spanish - 75 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Kettler Kinetic S3 - 7881-000 Manual

Product: