736112
21
Zoom out
Zoom in
Previous page
1/36
Next page
EN
Adjustments to the Running Surface |
ENGLISH 21
8. Adjustments to the Running Surface
Important!
When using the treadmill, make sure that the running belt is between the markings. If this is not the
case, please stop the treadmill training and adjust the running belt accordingly.
8.1 Belt Adjustment
The belt adjustment takes place during the belt run at a speed of approx. 6 km/h (possibly less). No one
may run on the belt during adjustment! If the strap moves to the right, turn the right adjusting screw
(top picture) clockwise with a socket wrench by a maximum of a quarter of a turn. Run the belt and
check whether it runs properly. Repeat the process until the belt is running straight again. If the belt
deviates to the left, turn the right adjusting screw (top picture) counterclockwise with a socket wrench
by a maximum of a quarter of a turn. Run the belt and check the operation. Repeat this procedure until
the belt is running straight again.
8.2 Belt Tightening
Turn the adjusting screw (top picture) clockwise for max. one turn. Repeat the process on the other side.
Check whether the endless belt slips. If this is the case, you must perform the described procedure
again.
Be very careful when adjusting and tightening the belt; extreme over- or undertensioning can damage
the treadmill!
21


Need help? Post your question in this forum.

Forumrules
1

Forum

kettler-alpha-run-200---tm1037-100

Reset search

  • Kun je de handleiding in het nederlands geven van het produckt kettler alpha run 200 tm 1037-100 Submitted on 8-5-2021 at 14:51

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kettler ALPHA RUN 200 - TM1037-100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kettler ALPHA RUN 200 - TM1037-100 in the language / languages: English, German, French as an attachment in your email.

The manual is 5,68 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kettler ALPHA RUN 200 - TM1037-100

Kettler ALPHA RUN 200 - TM1037-100 Installation Guide - English, German, French - 26 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info