646979

Kettler 07670-760 UNIX EX Manual

34
Zoom out
Zoom in
Previous page
1/150
Next page
Training and operating instructions
16
GB
Settings –> 3. Time and Date.
In this menu you may set time and date, display formats and
other display options.
Use “–/+” to change settings, formats and values.
Press “Back” to save the settings.
Settings –> 4. Standby
In this menu, you may set the period of time the display takes
to switch off after the work out when no more keys will be
pressed.
Press “Back” to save the settings.
Settings –> 5. Factory Settings
In this menu, the original programmes of the different groups
of programmes can be restored. Any programme changes will
be deleted.
Press “Delete” to get to the function “Delete OK”.
Press “Delete OK” to delete the entries and changes of the
menu options highlighted in black. For programmes, the origi-
nal settings will only be restored for active users.
Press All Settings to delete all settings of all users.
Press “Back” to jump to the menu “Settings”.
Firmware Update
The display of the operating software (firmware) is on the
right bottom side in the menu “Settings”.
The last 4 numbers indicate the firmware version: here 3038.
If later versions (higher numbers) are offered on our homepa-
ge, you may perform an update. For further information plea-
se visit our website: www.kettler.de > sport.
General Information
System beeps
Switch-on
Upon switching-on during the segment test, a short beep is
heard.
End of programme
A programme end (profile programmes, count-down) is indica-
ted by a short beep.
Exceeding maximum pulse
If the preset maximum pulse is exceeded by one pulse beat,
every 5 seconds two short beeps can be heard.
Error indication
In case of an error, 3 short beeps can be heard.
Recovery
In this function, the flywheel mass is braked automatically.
Further training is not recommended.
Calculation of the fitness grade (F):
Grade (F) = 6.0 –
(
10 x (P1–P2)
)
2
P1
P1 stress pulse, P2 = recovery pulse
F1.0 = very good, F6.0 = insufficient
Switching time/distance
With the programmes “Performance Profiles”, you can switch
the profile per column in the settings from time mode (1 minu-
te) to distance mode (400 metres or 0.2 miles). Cross ergome-
ter: (200 metres or 0.1 miles).
Profile display during training
At the beginning the first column is flashing. After that, one
column after the other is flashing, from left to right during trai-
ning.
Rotation-speed independent mode
(constant performance)
The electromagnetic eddy-current brake regulates the braking
torque to the preset performance in case of alternating pedal
rates.
Arrows pointing upwards/downwards
(Rotation-speed independent mode)
If a certain performance cannot be achieved with the rotation
speed (e.g. 400 Watt at 50 pedal rotations), the upward or
downward arrow indicates when faster or slower pedalling is
required.
Rotation-speed dependent mode
(constant braking torque)
The eddy-current brake sets a constant braking torque. Only
pedalling will change the performance.
Calculation of the average values
The calculation is effected per training session.
Pulse measuring
If you lose the pulse signal, the performance of the device will
remain constant for approx. 60 seconds and is then slowly
adjusted downwards.
… 34 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kettler 07670-760 UNIX EX at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kettler 07670-760 UNIX EX in the language / languages: English, German, Dutch, French, Italian, Polish, Spanish as an attachment in your email.

The manual is 3,18 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kettler 07670-760 UNIX EX

Kettler 07670-760 UNIX EX Installation Guide - English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Spanish - 44 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info