Manual Ketron SD1 PLUS (page 12 of 140) (English)

677866

Zoom out

Zoom in

1/140

A, B, C, D Each of these push buttons corresponds to a variation of the style, from the most simple to the most complex. Further to

these push buttons, also FILL IN and JUMP can be used to move forward or back among the variations.

HOLD When the LED is lit it is used to hold the last chord played to the left of the Split point of the keyboard. In other words, while

the Arranger is playing, it is used to hold the activation of all the accompaniment and bass tracks in use. If the LED is

switched off, the accompaniment will only work as long as the chord is held down on the keyboard, whereas the drum tracks

will continue to play whatever the case.

START When pressed it starts to play the automatic accompaniment. If START is pressed while the Arranger is already playing then

everything is stopped, in other words it acts as a Stop push button.

SLOW This decreases the Tempo value of the Arranger or of the Sequencer.

FAST This increases the Tempo value of the Arranger or of the Sequencer. By pressing SLOW and FAST together at the same time,

the Tempo value is blocked (marked by an asterisk) so that it cannot be modified by calling up another Style with a differ-

ent Tempo. To disable the blocking, press SLOW and FAST together at the same time . To restore the default Tempo of the

style press PAGE + and PAGE – together at the same time.

COUNT/PAUSE RESTART

With the Arranger stopped, COUNT adds a Count In beat where a stick beats the quarters. If an INTRO has also been pressed

before COUNT with the JUMP push button enabled, the Intro chosen will be enabled at the end of the count. With the

Arranger running, pressing this push button returns immediately to the first quarter of the beat, whatever the time position

in which it is pressed. It may prove useful for a singer who is not quite singing in time! When working with the Sequencer

(SEQUENCER LED lit), this push button sets the reproduction in stand-by until the COUNT/PAUSE RESTART push button is

pressed again.

LOCK This calls up the Lock and Interactive Arranger page. It is possible to select which accompaniment tracks among Drums, Bass

and Orchestra, situated to the left of the display, will not change timbre and rhythm, so that the tracks of one style can be

combined at pleasure with those of another. It is also a quick way of playing back a style with timbres of another style and

to thus create endless variations on the subject. When the Interactive Arrange (F10) function is enabled the player can

choose which of the automatic accompaniment tracks set in On among 2, 3, 4 and 5 will not be played when at least one key

of the Right section of the keyboard is pressed. The tracks will start playing again at the following beat, if no note of the

Right section is played. Thus it is possible to directly control the state of the tracks from the lead.

KEY START When the LED is lit and the Arranger is stopped, this push button is used to start the accompaniment when a note to the left

of the split point of the keyboard is played. If an INTRO or a FILL is selected, as soon as a chord is played the Intro or Fill-

In of the style will start. To control the performance of the Lower section, namely the background section for the left hand,

the player must access the ARRANGE MODE menu where the Lower timbre can be disabled if the Arranger is not running.

This has been foreseen to avoid the Lower notes from being reproduced together with the chord played before the Arranger

is started.

KEY STOP

When the LED is lit it stops the Arranger performance if a very short note or chord is played. It is restarted if another one or

even the same one is played. If the note or the chord is held down for more than 1/4, the Arranger continues to play. With the

Arranger stopped, KEY STOP is used to restart it by playing a chord that is longer than the time set in Sync Time in the

Arrange Mode menu. If a FILL or an INTRO has been selected, with the Arranger stopped and playing a chord that is longer

than the above mentioned value, the whole FILL or the INTRO will be played, whereas if the chord is very short, the Arranger

will stop immediately. If the KEY START LED is lit, as soon as the player takes his hand off the left part of the split point, the

Arranger stops and starts again as soon as a note or a chord is played on the part of the keyboard to the left of the split point.

TAP By playing the quarters on this push button, the Tempo value to be assigned to the Arranger and to the Sequencer will be

identified, provided that they are not playing or reproducing, then once the Tempo has been identified the reproduction will

start. When the Arranger and Sequencer are reproducing, the push button is used to increase the Tempo in steps of five

points each time it is pressed (Accelerando). By holding the TAP push button down, the Accelerando direction is changed

(this can be seen by the direction of the arrow) thus decreasing the Tempo in steps of five each time it is pressed

(Ritardando).

FADE IN/OUT With the Arranger running, it generates a fade out, in other words taking the volume of all the sections, including the Right

section, from the current value to zero. With the Arranger stopped it generates a fade in, in other words taking the volume

of all the sections from zero to the set volume. When pressed repeatedly it will not generate abrupt volume variations.

SD1 Manuale di Istruzioni

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Ketron SD1 PLUS in the language / languages: English as an attachment in your email.

The manual is 1,36 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Ketron SD1 PLUS

Ketron SD1 PLUS Additional guide - English - 24 pages

Ketron SD1 PLUS Quick start guide - English - 42 pages

Ketron SD1 PLUS User Manual - German - 156 pages

Ketron SD1 PLUS Quick start guide - German - 42 pages

Ketron SD1 PLUS User Manual - French - 140 pages

Ketron SD1 PLUS Quick start guide - French, Italian, Portuguese, Spanish - 42 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Ketron SD1 PLUS Manual

Product: