Manual Ketron SD1 PLUS (page 10 of 140) (English)

677866

Zoom out

Zoom in

1/140

●

If the LED of the PROGRAM push button is lit, the VOICE push buttons call up the Program memories.

●

If the LED of the ONE TOUCH push button is lit, the first row of STYLE push buttons calls up one of the eight pages of which the One Touch

memories are made up.

●

If the LEDs of the SET DRUM and MANUAL DRUM push buttons are lit, the first six VOICES push buttons are used to select the banks inclu-

ding ten Drum Kits each.

PUSH BUTTONS ON THE RIGHT-HAND SIDE OF THE CONTROL PANEL

1 TOUCH When the LED is lit, ten timbres of the first of the eight groups available are displayed. The One Touch Solo function is used

to save the most frequently used Voices so that they can be called up easier rather than having to first select the group and

then a timbre from within it.

VOCALIZER EDIT This is used to gain access to the programming parameters of the Vocalizer from the main page.

VOCALIZER ON/OFF

When the LED is lit, the Vocalizer is enabled on the Voice or the audio signal sent from input 1 for the microphone

PROGRAM When the LED is lit, eight Program memories are displayed, to be selected using the function push buttons. A program com-

bines up to four timbres dedicated to the lead section with the relative parameters.

2ND VOICE When the LED is lit, the second Voice is enabled on the lead, the timbre of which is displayed under the main one.

2ND VOICE EDIT When the LED is lit it is used to call up a new timbre to replace that set by Ketron for the second voice using the VOICES

push buttons and also from the User Voice group. By pressing 2ND VOICE and 2ND VOICE EDIT at the same time the block

of the timbre assigned at the time to the Second Voice is obtained, which will appear with an asterisk in front of the name.

BLOCK REGISTR. The Registrations control all the SD1 settings, including the automatic call up of audio and TXT files. When the LED is lit the

user can call up one of the 198 Registrations using the numeric keypad, namely the STYLE push buttons. The single

Registration can be loaded directly from hard disk or floppy disk using the SINGLE REGISTR. push button in use.

PIANIST When the LED is lit the chords are acknowledged right along the whole keyboard, including the Right section. This function

has been devised to be able to play freely with two hands and to fully exploit the Arranger potentials. If the same timbre is

required right along the whole keyboard, for example the piano, the Split point is to be moved over to the first note of the

keyboard (E0) using the dedicated push button. There are two different chord acknowledgement methods that can be cho-

sen in the Utility menu. The default setting is Standard.

STYLE SETTING

For each style Ketron has foreseen ten settings, enabling just as many timbres to be called up for the Style lead part. When the

LED is lit the ten timbres pre-set for that style are displayed. The attribution between styles and timbres can be modified.

DEMO & HIT By pressing the PIANIST and STYLE SETTING push buttons together at the same time access is gained to the folder of the

hard disk called Demo & Hit, which can store both demo files and any other Midi file for a total of 999 files. On the contrary

to SONG PLAY, Demo & Hit is used to immediately play a Midi file by simply selecting it using the F1-F10 function push but-

tons and it allows a large number of Midi files to be ready to be played. Press EXIT to exit from Demo & Hit. Considering

that Demo & Hit refers to a specific folder of the hard disk, the Midi files within Demo & Hit can be copied and erased with

the normal procedures dedicated to the management of the hard disk. The Right and Lower part can be played while a Midi

file is being reproduced plus the SPLIT push button is also enabled.

In this version of the operating system this special push button is used together with * to disable the Sustain in the Pianist mode.

* This is situated on the FOLK push button of the STYLES push buttons. It works when the Demo & Hit function is in use

where, when the Midi file selected is Stopped, it is used to put the Midi files within the folder in the desired order with the

possibility of replacing them or cancelling their position. It is also used in SONG PLAY when in the Juke-Box function where,

if it is pressed, the Chain Select command appears to create temporary chains of Midi files to be reproduced one after the

other. Furthermore, in the Pianist enabled mode, when pressed together with the # push button it disables the Sustain.

LEAD The FILL 1 push button has another function when the Demo & Hit function is in use. It is used to cut-out the Lead track,

usually set on the MIDI 4 channel, from the reproduction of the Midi file.

DRUM & BASS The FILL 2 push button has another function when the Demo & Hit function is in use. It mutes the volume of all the tracks

with the exception of the drum and bass ones.

DRUM SET The drum set assigned to the Drum tracks of the style can be changed when the LED is lit. The drum set pages following the

first page can be called up using PAGE +/- or directly using the first six VOICES push buttons. Drum Kit written in capital

letters refers to those made up of ROM samples, those on the other hand with a dot at the side are the sampled grooves,

assigned to the Drum 2 tracks of the style.

SD1 Owner’s Manual

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Ketron SD1 PLUS in the language / languages: English as an attachment in your email.

The manual is 1,36 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Ketron SD1 PLUS

Ketron SD1 PLUS Additional guide - English - 24 pages

Ketron SD1 PLUS Quick start guide - English - 42 pages

Ketron SD1 PLUS User Manual - German - 156 pages

Ketron SD1 PLUS Quick start guide - German - 42 pages

Ketron SD1 PLUS User Manual - French - 140 pages

Ketron SD1 PLUS Quick start guide - French, Italian, Portuguese, Spanish - 42 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Ketron SD1 PLUS Manual

Product: