The control panel is divided into sections according to the group of functions related to the push buttons. From left to right you will see the following:
VOLUME
Two rows of six push buttons that are used to control the general volume for the Drums, Bass, Chords, Orchestral, Lower and Right sec-
tions. The volume can be immediately muted by pressing the right-hand and left-hand VOLUME push buttons of one section together
at the same time. To restore the volume set prior to muting simply press one of the two VOLUME push buttons of the section once.
HOW TO MODIFY THE VOLUME OF THE RIGHT LEAD
To raise the volume, hold the right-hand RIGHT VOLUME push button down. To lower the volume, use the left-hand push button.
To Mute the volume press the two RIGHT VOLUME push buttons together at the same time.
To restore the previous volume set press a RIGHT VOLUME push button.
PUSH BUTTONS ON THE LEFT-HAND SIDE OF THE CONTROL PANEL
There are eight push buttons on the left-hand side of the control panel. All of these are provided with a LED which, when lit, points out that the
push button is enabled. They are used to gain access to menus controlling crucial functions.
SONG RECORDThis enables the sequencer in registration mode and makes it possible to record everything played on the SD1, from the sty-
les to calling up the Voices.
SONG PLAYThis enables the sequencer in reproduction mode. It is also used to call up Midi file chains, to display the words and to tran-
spose the whole Midi file.
PATTERN EDITThis is used to call up the menus for programming and modifying the style.
SEQUENCERThis is used to gain access to a complete sequencer with various editing functions.
MASTER FOLDER
When the LED is lit the hard disk utilises the Master Folder function to simplify and automate the reading and writing of any type of file.
SINGLE REGISTR.
When the LED is lit the single Registrations stored on hard or floppy disk are called up.
SAMPLER MPSThis is used to call up the menus and the functions of the built-in sampler with relative editing functions.
DISKThis is used to gain access to the management functions both on floppy disk and built-in hard disk. When the DISK LED is lit
the PAGE+ and PAGE– push buttons can be used to select the hard disk or the floppy disk.
SPLITThis enables the choice of the split point of the keyboard that splits the lead section (Right) on the right from that dedicated
to the Arranger and to the manual accompaniment parts (Lower and Manual Bass) to its left. To establish the split point, hold
the SPLIT push button down and play the note on the keyboard that represents the split point. The default split point is set
as note C3. To play the timbre of the lead over the whole keyboard press the SPLIT push button and the last key of the key-
board at the left end (E0)
ROTORWhen the LED is lit it enables the Leslie “ effect dedicated to the electro-magnetic organs for the typical Hammond sounds!
BLOCK/LIST RAM STYLE
This is used to instantaneously display the list of styles stored on hard disk from which one or a number of styles can
be loaded in RAM. The push button can be enabled only if the MASTER FOLDER push button LED is already lit.
Volume buttonsVoice buttons to select the sounds
Selection buttonsStyle buttons to select the different styles
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Ketron SD1 PLUS at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Ketron SD1 PLUS in the language / languages: English as an attachment in your email.
The manual is 1,36 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
