677866
5
Zoom out
Zoom in
Previous page
1/140
Next page
Owner’s Manual SD1
5
Connections
The SD1 is supplied standard with all the audio and MIDI connections required and also for the pedals needed for its optimum use. The only
options are the video interface and the two pedals. Below are the connections, from the left to the right of the panel:
MICRO 1: Audio input for microphones on balanced XLR connection. It is preferable to use this input for the main microphone for two major
reasons: the balanced connection is more silent and less subject to environmental interference. The signal made available by this input can be
processed by the Vocalizer built in the SD1.
MICRO 2: Audio mono Jack input 1/4’ unbalanced for auxiliary microphones. The Micro 2 signal cannot be processed by the Vocalizer built
in the SD1, but only by the overall effects.
MICRO GAIN: This controls the gain of the Audio microphone inputs.
PHONES: This is used to connect a stereo headphone. Micro 2 Output Monophonic audio output 1/4’ of the input signal of Micro 2, that
is not processed by the built-in effects as Reverb and chorus..
MICRO 2 OUTPUT:
Monophonic audio output 1/4’ of the input signal of Micro 1 no processed by the Vocalizer internal effects as Reverb and chorus.
MICRO 1 OUTPUT: Monophonic audio output 1/4’ of the input signal of Micro 1 processed by the Vocalizer but not by the internal effects
as Reverb and chorus.
OUTPUT LEFT/MONO 1, RIGHT 2, 3, 4: Monophonic audio outputs 1/4’ of which Left can work as overall monophonic output for the
whole instrument. When the Left and Right outputs are used the SD1 works in stereo. Outputs 3 and 4, again monophonic, can be used for par-
ticular instrumental sections of the keyboard so that they can be controlled by a separate mixer or processor with separate effects.
PEDAL FOOTSWITCH: This is a multipolar socket used to connect optional pedals with six or thirteen swit-
ches, to control many functions including automatic accompaniment functions.
SUSTAIN PEDAL: This is the socket for the Sustain On/Off type pedal.
VOLUME PEDAL: This is the socket for the continuous Volume control pedal. It is advisable to use pedals produced by Ketron to avoid
dangerous short circuits or abnormal conditions in general.
MIDI In (GM): Midi Input Port used just to control the General MIDI timbre generator of the SD1 with sixteen MIDI parts.
MIDI In 2 (Keyboard):
MIDI port with which each SD1 section is controlled from a separate keyboard or from an accordion with MIDI interface.
MIDI Out: MIDI port used to send the data generated by the SD1, both for automatic accompaniment and lead part.
MIDI Thru: MIDI port that sends the replication of all received data only from the MIDI IN 1 input.
COMPUTER INTERFACE: The SD1 can be directly connected to a PC or to a Mac via this port, thus acting as MIDI interface to all effects.
VIDEO INTERFACE: This optional device is used to display the words of a Midi file and other information given by the musician on a
monitor for the audience.
MAIN SWITCH: This push button turns the SD1 on.
AC: Pit for the power supply cable.
2 13
8
9
10
11
12
4 5
1 3
6
7
1
2
3
4
5
6
7
8
9
10
11
12
13
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ketron SD1 PLUS at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ketron SD1 PLUS in the language / languages: English as an attachment in your email.

The manual is 1,36 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Ketron SD1 PLUS

Ketron SD1 PLUS Additional guide - English - 24 pages

Ketron SD1 PLUS Quick start guide - English - 42 pages

Ketron SD1 PLUS User Manual - German - 156 pages

Ketron SD1 PLUS Quick start guide - German - 42 pages

Ketron SD1 PLUS User Manual - French - 140 pages

Ketron SD1 PLUS Quick start guide - French, Italian, Portuguese, Spanish - 42 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info