683161
162
Zoom out
Zoom in
Previous page
1/196
Next page
Parameter Behavior of Assigned Functions
FSK/PSK
Press
Switches between the FSK and PSK modes
Press
and hold
Switches to the reverse mode
GENE
Press Band Direct selection (GENE)
Press
and hold
Switches the transverter to ON or OFF
IF FIL
Press Switches between RX filters A, B and C
Press
and hold
Starts up or exits the RX filter configuration
screen
LOCK Press
Switches the frequency lock function to ON
or OFF
LSB/USB Press
Switches between the LSB and USB modes
M.IN Press
Starts up the memory scroll mode and
registers a memory channel
M/V, M>V
Press Switches between memory and VFO
Press
and hold
Memory shift
MAX-Po
Press
Switches the TX output power limiter to ON
or OFF
Press
and hold
Starts up or exits the TX output power limit
configuration screen
Message
Memory CH 1
Press
Starts transmission of CW/RTTY/PSK
message 1
Message
Memory CH 2
Press
Starts transmission of CW/RTTY/PSK
message 2
Message
Memory CH 3
Press
Starts transmission of CW/RTTY/PSK
message 3
Message
Memory CH 4
Press
Starts transmission of CW/RTTY/PSK
message 4
Message
Memory CH 5
Press
Starts transmission of CW/RTTY/PSK
message 5
Message
Memory CH 6
Press
Starts transmission of CW/RTTY/PSK
message 6
Message
Memory CH 7
Press
Starts transmission of RTTY/PSK
message 7
Message
Memory CH 8
Press
Starts transmission of RTTY/PSK
message 8
METER Press Switches the meter type
MHz Press Switches to the MHz mode
MONI Press
Switches the TX monitor function to ON or
OFF
Mute (Sub
Receiver)
Press
Switches the sub-receiver audio mute to
ON or OFF (use for Split Transfer B)
NB1
Press Switches NB1 to ON or OFF
Press
and hold
Starts up or exits the NB1 level
configuration screen
NB2
Press Switches NB2 to ON or OFF
Press
and hold
Starts up or exits the NB2 level
configuration screen
NCH Press Switches the notch filter to ON or OFF
NR
Press
Switches the noise reduction mode
(NR1/NR2/OFF)
Press
and hold
Starts up or exits the NR1 level
configuration screen or NR2 level
configuration screen
PLAY Press
Starts or pauses playback of a file recording
PRE Press Preamplifier selection
PROC
Press
Switches the speech processor to ON or OFF
Press
and hold
Starts up or exits the speech processor
configuration screen
Parameter Behavior of Assigned Functions
Q-M.IN Press Registers to a quick memory
Q-MR
Press Calls up a quick memory
Press
and hold
Deletes all quick memory data
REC
Press Starts or pauses manual recording
Press
and hold
Writes full-time recording data to a file
RIT Press Switches RIT to ON or OFF
RX ANT
Press Switches the RX antenna to ON or OFF
Press
and hold
Switches the antenna output for the
external receiver to ON or OFF
RX EQ
Press
Switches the RX DSP equalizer to ON or OFF
Press
and hold
Starts up or exits the RX equalizer screen
RX Monitor
Press Switches the RX monitor to ON or OFF
Press
and hold
Switches the RX monitor (squelch forcibly
opened) to ON or OFF <only while the key
is pressed and held down>
Safe Removal of
USB Flash Drive
Press Unmounts the USB flash drive
SCAN
Press Starts or stops scanning
Press
and hold
Starts up or exits VFO/Program Scan
segment configuration screen/Memory
Scan group configuration screen
SCP Press Switches to the SCOPE screen
SEND Press Enables or disables the TX mode
SPLIT
Press Switches split operation to ON or OFF
Press
and hold
Starts configuration of the frequency for
split operation
STOP Press Stops recording or playback
SWL Press Switches SWL display mode to ON or OFF
TF-SET Press Switches TF-SET to ON or OFF
TX EQ
Press Turning ON/OFF TX Equalizer
Press
and hold
Starts up or exits the TX equalizer screen
TX TUNE1 Press Starts or ends TX Tune 1
TX TUNE2
Press
and hold
Starts or ends TX Tune 2
<This behavior is only applicable when the
key is pressed and held down>
UP Key
(Microphone)
Press
Increases the frequency (in VFO mode)
Moves to a larger channel number (in
memory channel mode)
Moves up the menu or to a larger setting
value (on menu configuration screen)
VOICE1 Press Starts the voice guide (VOICE1 function)
VOICE2 Press Starts the voice guide (VOICE2 function)
VOICE3 Press Starts the voice guide (VOICE3 function)
VOX
Press Switches VOX to ON or OFF
Press
and hold
Starts up or exits the VOX configuration
screen
XIT Press Switches XIT to ON or OFF
Off Press Does not assign any function
16 OTHER FUNCTIONS
16-4
162


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kenwood TS-890S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kenwood TS-890S in the language / languages: English as an attachment in your email.

The manual is 21,11 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kenwood TS-890S

Kenwood TS-890S User Manual - German - 196 pages

Kenwood TS-890S User Manual - Dutch - 196 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info