683161

Kenwood TS-890S Manual

148
Zoom out
Zoom in
Previous page
1/196
Next page
Configuring the Auxiliary Clock Time Zone
Follow the steps below to configure the time zone of the auxiliary
clock.
1
Select Clock Menu [03] “Timezone (Secondary
Clock)”.
2 Press F4 [SELECT].
3 Press F2 [–]/ F3 [+] or turn the [MULTI/CH] control
to select the time zone of the local clock.
Setting Value
UTC-14:00 to UTC+00:00 (default) to UTC
+14:00 (15min/step)
4 Press F6 [OK].
Registering an Auxiliary Clock Identifier
The auxiliary clock can be assigned with a single alphabet as an
identifier.
1
Select Clock Menu [04] “Secondary Clock
Identification Letter”.
2 Press F4 [EDIT].
3 Press F2 [–]/ F3 [+] or turn the [MULTI/CH] control
to select an identifier character.
•
“U” is used in the default setting, which stands for
“Coordinated Universal Time (UTC)”.
4 Press F6 [OK].
Configuring the Date Display Format
The date display format can be configured as follows.
1
Select Clock Menu [05] “Date Display Format”.
2 Press F4 [SELECT].
3 Select the preferred date display format.
Setting Value
MMM/DD/'YY (K type: default)/ DD/MMM/'YY
(E type: default)/ 'YY/MMM/DD
4 Press F6 [OK].
Configuring the Clock Display
Follow the steps below to configure the types and number of clocks
to display.
1
Select Clock Menu [06] “Clock Display”.
2 Press F4 [SELECT].
3 Select the preferred time display format.
Setting Value
Off/ Local Clock/ Secondary Clock/ Both
(default)
Off: Does not display the clock.
Local Clock: Displays only the local clock.
Secondary Clock: Displays only the secondary clock.
Both: Displays both the local clock and secondary clock.
4 Press F6 [OK].
Clock Correction Using NTP (Network Time
Protocol)
The NTP server can be used to correct the clock time
automatically. This is done by applying the date and time acquired
from the NTP server to the built-in clock of this transceiver.
The following configuration procedures are needed to make use
of the NTP function.
•
Connect this transceiver to a network such as a home LAN via
a LAN cable.
•
To make use of an NTP server on WAN, allow communication
to be established via the Network Time Protocol Port (port 123).
For a home LAN that uses a broadband router, ensure that port
123 of the broadband router is open.
•
Configure the network and IP address on this transceiver. For
more details on the method of configuration, please refer to
“LAN” (15-1).
•
Configure the address of the NTP server.
•
Configure the NTP server address of the time zone configured
for the local clock on this transceiver. For more details on the
method of configuration, please refer to “Configuring the NTP
Server Address” (14-3).
Displaying the Auto Correction Configuration Screen
1 Press [MENU] to display the menu screen.
2 Press F [CLOCK] to display the Clock menu screen.
•
If F [CLOCK] is not displayed, press F [MORE] to display F
[CLOCK].
3
Select Clock Menu [1] “Automatic Time
Correction”.
4 Press F4 [SELECT].
The auto correction configuration screen is displayed.
.
14 CLOCK DISPLAY/TIMER
14-2
… 148 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kenwood TS-890S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kenwood TS-890S in the language / languages: English as an attachment in your email.

The manual is 21,11 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kenwood TS-890S

Kenwood TS-890S User Manual - German - 196 pages

Kenwood TS-890S User Manual - Dutch - 196 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info