606693
64
Zoom out
Zoom in
Previous page
1/104
Next page
58
M. CH
CW
AGC AUTO
M. CH
USB PRG
AGC AUTO
M.CH
FSK
AGC AUTO
M.CH
USB PRG
AGC AUTO
M. CH
M. SCR PRG
AGC AUTO
M. CH
USB M. SCR
AGC AUTO
USB
AGC AUTO
USB
AGC AUTO
9 MEMORY FEATURES
STORING SCAN LIMITS IN CH 99
Although the Scan function is discussed fully in the next
chapter, here you will learn how to store the frequency
limits that must be saved first before Scan can be used.
1 Select the Start frequency limit and mode using
VFO A.
This frequency can also be used for receiving
and transmitting after completion of this
procedure.
2 Select the End frequency limit using VFO B.
3 Press [RX A].
4 Press [M.IN] to select the Memory Scroll mode.
•To exit from Memory Scroll mode and abort the
storage process, press [CLR].
5 Turn the M.CH/VFO.CH control to select channel 99.
6 Press [M.IN] to store the frequency limits.
•Pressing [M.IN] overwrites new data on any
previous data in that channel.
Note:
On some General market versions, the frequency limits must
be on the same band or they cannot be stored.
Confirming Start/End Frequencies
The following allows you to check the programmed
Start and End frequencies.
1 Press [RX M.CH] to select Memory Recall mode.
2 Turn the M.CH/VFO.CH control to select
channel 99.
3 Press [DOWN] to check the Start frequency and
press [UP] to check the End frequency.
Programmable VFO Function
This function restricts the range of the Tuning
control to those frequencies included by the Start
and End frequencies that were programmed above.
One application of this function is to keep your
operating within the authorized frequency limits of
your license.
1 Press [RX M.CH] to select Memory Recall mode.
2 Turn the M.CH/VFO.CH control to select
channel 99.
3 Turn the Tuning control and you will notice that
you can only tune from the Start frequency to the
End frequency. After reaching the End frequency,
the transceiver reverts back to the Start
frequency again.
64


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kenwood TS-870S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kenwood TS-870S in the language / languages: English as an attachment in your email.

The manual is 2,76 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kenwood TS-870S

Kenwood TS-870S User Manual - Dutch - 102 pages

Kenwood TS-870S User Manual - French - 102 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info