606693
61
Zoom out
Zoom in
Previous page
1/104
Next page
55
M. CH
USB
AGC AUTO
USB
AGC AUTO SPLIT
RIT
M. CH
USB M. SCR
AGC AUTO
M. CH
M. SCR
AGC AUTO
9 MEMORY FEATURES
Split-Frequency Channels
1 Using VFO A, select a receive frequency and
mode.
2 Using VFO B, select a transmit frequency and
mode.
3 Press [RX A], [TX B] to select split-frequency
mode.
•The indicators in the [RX A] and [TX B]
buttons must be ON.
4 Press [M.IN] to select Memory Scroll mode.
•To exit from Memory Scroll mode and abort
the storage process, press [CLR].
5 Turn the M.CH/VFO.CH control to select a
memory channel.
6 Press [M.IN] to store the frequencies and
associated data in the selected memory channel.
Pressing [M.IN] writes your new data on any
previous data in that channel.
Note:
If you prefer, you can store the transmit data in VFO A
and the receive data in VFO B instead.
MEMORY CHANNEL RECALL
Once a frequency with associated data is stored in a
memory channel, this procedure allows you to retrieve
that frequency and data.
1 Press [RX M.CH] to select Memory Recall mode.
2 Turn the M.CH/VFO.CH control, or press Mic [UP] or
[DWN], to select the memory channel that you want.
After ascending to the maximum memory
channel number, continuing to step in the same
direction returns you to the lowest channel in a
circular manner. This is also true when
descending through the channels.
Continuously holding down Mic [UP] or [DWN]
steps the transceiver through the memory
channels until the button is released.
•You cannot change memory channels while
transmitting.
Note:
Memory channels can be changed while using the TF-SET
function.
Quick Channel Search
When looking for a particular programmed memory
channel, it is quicker to activate the search mode as
explained below. This mode can also be used to
search only for vacant (non-programmed) channels.
Programmed Channel Search:
While in Memory channel mode, press [1MHz] to
toggle the search function ON or OFF.
“MHz” lights when the function is ON. Now, only
those channels that contain programmed data
can be selected.
Attempting to change channels when there are
no programmed channels to select causes an
alarm to sound. The current channel cannot be
changed in this case.
Vacant Channel Search:
While in Memory Scroll mode {page 56}, press
[1MHz] to toggle the function ON or OFF.
•“MHz” lights when the function is ON. Only those
channels that do not contain data can be
selected.
Attempting to change channels when there are
no vacant channels to select causes an alarm to
sound. The current channel cannot be changed
in this case.
61


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kenwood TS-870S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kenwood TS-870S in the language / languages: English as an attachment in your email.

The manual is 2,76 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kenwood TS-870S

Kenwood TS-870S User Manual - Dutch - 102 pages

Kenwood TS-870S User Manual - French - 102 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info