606693
60
Zoom out
Zoom in
Previous page
1/104
Next page
54
M. CH
M. SCR
AGC AUTO
M. CH
M. SCR
AGC AUTO
MEMORY FEATURES
MICROPROCESSOR MEMORY BACKUP
This transceiver uses a lithium battery to retain the user-
specified memory items. Switching OFF the power will
not erase the Menu Setups or memory channels.
Lithium battery life is approximately 5 years.
If you find the transceiver powers-up with default
settings, and VFO and memory channel data is erased,
have the lithium battery replaced. Contact an
authorized KENWOOD Service Facility or dealer.
CONVENTIONAL OR QUICK MEMORY?
Memory channels allow you to save various operating
parameters (receive frequency, operating mode, etc.)
for recall at a later time. You can store this data in
Conventional or Quick memory. Conventional memory
is used for storing data that you may want to recall
many times in the future during different operating
sessions. For example, Conventional memory is useful
to store the frequency where you regularly meet your
club members.
However, Quick memory is meant for quickly saving
data without needing to specify a particular memory
channel. It’s likely that you won’t need this data during
future operating sessions. For example, as you tune
across the band looking for DX, it is convenient to store
stations that you want to contact into Quick memory.
You can quickly jump between several different Quick
memory channels as you monitor them.
CONVENTIONAL MEMORY
MEMORY CHANNEL DATA
There are a total of 100 Conventional memory
channels. The channels are numbered 00 ~ 99.
Channels 00 ~ 98 have identical characteristics
whereas channel 99 is reserved for programming VFO
tuning ranges and scan ranges.
Channels 00 ~ 98 can store the following:
Receive frequency and mode
•Transmit frequency and mode
Subtone frequency
Memory Lock Out (OFF/ON)
Note:
The Subtone selected via Menu No. 57 (SUB.TONE) is
automatically stored, but the stored Subtone can only be used if the
TX and RX modes are FM.
Channel 99 can store the following:
•Frequency and mode (simplex only)
Start frequency and mode
End frequency
Memory Lock Out (OFF/ON)
MEMORY CHANNEL STORAGE
Memory channels can be either simplex or
split-frequency. Simplex channels use the stored
frequency for receiving and transmitting.
Split-frequency channels use a different frequency for
transmitting and receiving. Also, even if RIT or XIT is
ON with a frequency offset selected, this offset will not
be added to the frequency when it is stored.
Simplex Channels
1 Press [RX A] or [RX B] to select simplex mode.
•The indicators in the [RX A] and [TX A]
buttons, or the indicators in the [RX B] and
[TX B] buttons must be ON.
2 Select the frequency, mode, etc. to be stored.
3 Press [M.IN] to select Memory Scroll mode.
•To exit from Memory Scroll mode and abort
the storage process, press [CLR].
4 Turn the M.CH/VFO.CH control to select a
memory channel.
5 Press [M.IN] to store the frequency and
associated data in the selected memory channel.
Pressing [M.IN] overwrites your new data on
any previous data in that channel.
60


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kenwood TS-870S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kenwood TS-870S in the language / languages: English as an attachment in your email.

The manual is 2,76 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kenwood TS-870S

Kenwood TS-870S User Manual - Dutch - 102 pages

Kenwood TS-870S User Manual - French - 102 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info