606693
51
Zoom out
Zoom in
Previous page
1/104
Next page
45
USB
AGC AUTO TONE
XIT
USB
AGC AUTO TONE
XIT
USB
VOX AGC AUTO
7 OPERATING AIDS
TRANSMITTING
VOX (VOICE-OPERATED TRANSMIT)
VOX eliminates the necessity of manually switching to
the transmit mode each time that you want to transmit.
The transceiver automatically switches to transmit when
the VOX circuitry senses that you have begun speaking
into the microphone.
When using VOX, get into the habit of pausing between
thoughts to let the transceiver drop back to receive
briefly. You will then hear if anybody wants to interrupt,
plus you will have a short period to gather your thoughts
before speaking again. Your listener will appreciate
your consideration as well as respect your more
articulate conversation.
Press [VOX] to toggle the VOX function ON or OFF.
•“VOX lights when the function is ON.
Microphone Input Level Adjustment
To enjoy the VOX mode, take time to set the gain of
the VOX circuit to the correct level.
1 Select a voice mode, switch ON the VOX
function, and begin speaking into your
microphone using your normal level of voice.
2 Access Menu No. 28 (VOX.GAIN), then select
different settings (default is 4) until the transceiver
reliably switches to transmit each time you speak.
The best setting will allow the transceiver to
switch between receive and transmit;
however, background noises near your
operating position should not falsely switch
the transceiver.
This Menu item is configurable even if the
VOX function is OFF or while you are
transmitting.
Note:
This transceiver does not have an ANTI-VOX control. DSP is
able to automatically lower the input sensitivity for received audio that
is output from the speaker.
Delay Time Adjustment
1 Select a voice mode, switch ON the VOX
function, and begin speaking into your
microphone using your normal level of voice.
2 Adjust the DELAY control so that the transceiver
changes back to receive a brief time after you
stop talking.
The DELAY control has a range from
150 ~ 2700 ms. Each step equals 10.6 ms.
Note:
Setting the delay time by computer overrides any setting
of the
DELAY
control. The control then has no effect. To restore
functionality to the
DELAY
control, turn the control. The newly
selected setting becomes effective.
TRANSMIT INHIBIT
Transmit Inhibit prevents the transceiver from being
placed in the transmit mode. No signals can be
transmitted if this function is ON. When the transceiver
is inhibited from transmitting, the graduations on the
PWR meter go out as a visual reminder.
TX Inhibit OFF: Transmissions are possible.
TX Inhibit ON: Transmissions are not possible.
Switch the function ON or OFF via Menu No. 27
(TX INH). The default is OFF.
XIT (TRANSMIT INCREMENTAL TUNING)
Similar to RIT, XIT provides the ability to change your
transmit frequency by ±9.99 kHz in steps of 10 Hz
without changing your receive frequency. If the Fine
Tuning ([FINE]) function is ON, the step size is 1 Hz.
1 Press [XIT].
•“XIT and the XIT frequency display appear.
2 Press [CLEAR] to reset, if required, the XIT offset
to 0.
3 Turn the RIT/XIT control to change your transmit
frequency.
4 To cancel the XIT function, press [XIT].
Note:
The frequency shift set by the
RIT/XIT
control is also used by
the RIT function. Therefore, changing or clearing the XIT frequency
also affects the RIT frequency.
51


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kenwood TS-870S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kenwood TS-870S in the language / languages: English as an attachment in your email.

The manual is 2,76 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kenwood TS-870S

Kenwood TS-870S User Manual - Dutch - 102 pages

Kenwood TS-870S User Manual - French - 102 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info