606693
30
Zoom out
Zoom in
Previous page
1/104
Next page
24
MENU SETUP
WHAT IS A MENU?
Many functions on this transceiver are selected or
configured via a software-controlled Menu instead of
physical controls on the transceiver. Once familiar with
the Menu system, you will appreciate the versatility it
offers. No longer is the number and complexity of
features restricted by the physical controls and
switches on the Front Panel.
MENU ACCESS
The following procedure explains how to check or
change any of the Menu items.
1 Press [MENU].
2 Turn the M.CH/VFO.CH control to select the desired
Menu No.
3 Press [UP], or [DOWN], or Mic [UP], or Mic [DWN]
to change the current selection for this Menu item.
4 Press [MENU] or [CLR] to exit Menu mode.
If the power is switched OFF before this step is
completed, the selection just made will be
canceled.
MENU A/ MENU B
The TS-870S has two menus. These menus are called
Menu A and Menu B. The menus contain identical
functions; however, each menu can be configured
independently.
For example, you may enjoy two different kinds of
operating activities but you like to configure the
transceiver differently for each activity. Menu A could
be configured with one set of transmit signal
characteristics, DSP settings, programmable buttons,
frequency steps, etc. Menu B could be configured
completely differently. By switching from Menu A to
Menu B, you could instantly change Menu
configuration and button assignment to suit your
current operating style. Or, two operators may share a
single transceiver. By dedicating one Menu per
operator, each would always enjoy the best
configuration.
With a little thought, you can determine the best setups
for each Menu for your personal situation. Once youve
decided your strategy, select via Menu No. 00
(MENU.A/B) the Menu that you want to set up first.
Then use the information in this chapter and on the
referenced pages to configure your ultimate operating
environments.
QUICK MENU FUNCTION
The Quick Menu function complements the Menu A/B
selection capability by allowing you to create your own
customized but abbreviated Menu. Copying Menu
items to the Quick Menu has no effect on the Menu.
You should add only those Menu items to the Quick
Menu that you use frequently.
Programming the Quick Menu
1 Press [MENU].
2 Turn the M.CH/VFO.CH control to select the
desired Menu No.
3 To add the selected Menu item to the Quick
Menu, press [M.IN].
The star lights indicating that the item has
been added to the Quick Menu.
Each press of [M.IN] toggles the item into or
out of the Quick Menu.
4 Press [MENU] or [CLR] to exit Menu mode.
Using the Quick Menu
1 Press [MENU].
2 Press [1MHz].
•“MHz lights.
3 Turn the M.CH/VFO.CH control to select the
desired Quick Menu No.
If the Quick Menu has not been programmed
yet (see previous section), then turning the
M.CH/VFO.CH control causes an alarm to be
emitted (either CHECK in Morse code or a
triple beep).
4 Press [UP], or [DOWN], or Mic [UP], or
Mic [DWN] to change the current selection for
this Quick Menu item.
5 Press [MENU] or [CLR] to exit Quick Menu
mode.
TEMPORARY MENU RESETTING
This convenient function allows you to temporarily reset
all Menu items to their factory default selections. This
can be useful to verify whether a Menu setting is
causing undesirable operation.
1 Press [CLR]+[ ] to temporarily reset all Menu items
to factory default values.
The MENU indicator flashes.
2 To change all Menu items back to your own
programmed values, switch OFF the transceiver,
then switch it back ON.
AGC AUTO MENU
A B
MHz
AGC AUTO MENU
A B
30


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kenwood TS-870S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kenwood TS-870S in the language / languages: English as an attachment in your email.

The manual is 2,76 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kenwood TS-870S

Kenwood TS-870S User Manual - Dutch - 102 pages

Kenwood TS-870S User Manual - French - 102 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info