Manual Kenwood TS-480SAT (page 60 of 104) (English)

511243

Zoom out

Zoom in

1/104

11 MEMORY FEATURES

■ Memory Scroll

1 Press [QMI/ M.IN] (1 s) to enter Memory Scroll

mode.

• The memory channel that was last selected

appears.

2 Turn the MULTI control, or press Mic [UP]/

[DWN] to step through the memory channels.

•You can also change channels by entering a

2-digit number. Press [8], [9] for example.

3 To exit Memory Scroll mode, press

[MTR/ CLR].

• The transceiver re-displays the memory

channel or VFO frequency that was

selected before you activated Memory

Scroll.

Note:

◆

While the transceiver is in Memory Scroll mode, you can

operate the following controls and keys only:

[QMI/ M.IN]

[MTR/ CLR]

, numeric keys (

[0]

[9]

), Mic

[UP]

[DWN]

Mic

[PTT]

control,

SQL

control,

MULTI

control and

[ ]

(POWER).

◆

Do not press

[QMI/ M.IN]

again after entering Memory Scroll

mode. Pressing

[QMI/ M.IN]

results in over-writing the

current VFO data to the memory channel you selected.

■ Temporary Frequency Changes

After retrieving frequencies and associated data in

Memory Recall mode, you can temporarily change

the data without overwriting the contents of the

memory channel.

1 Access Menu No. 07 and select “on”.

• Skip this step when changing only the

associated data (not the frequency).

2 Recall a memory channel.

3 Change the frequencies and associated data.

• Use only the Tuning control to select a

frequency.

4 If necessary for future use, store the changed

data in another memory channel. Refer to

“Channel ➡ Channel Transfer” {below}.

Note:

If Menu No. 07 is selected “on”, the frequency of the split-

memory channel can be changed while using the TF-SET

function.

MEMORY TRANSFER

■ Memory \ VFO Transfer

After retrieving frequencies and associated data

from Memory Recall mode, you can copy the data

to the VFO. This function is useful, for example,

when the frequency you want to monitor is near

the frequency stored in a memory channel.

1 Recall the desired memory channel {page 51}.

2 Press [QMR/ M

sVFO] (1 s).

• When a simplex channel is recalled, the

data is copied to VFO A or VFO B,

depending on which VFO was used to recall

the channel.

• When a split channel is recalled, the RX

data is copied to VFO A and the TX data is

copied to VFO B.

Note:

Pressing

[QMR/ M

VFO] (1 s)

after temporarily changing

the retrieved data copies the new data to the VFO.

■ Channel \ Channel Transfer

You can also copy channel information from one

memory channel to another. This function is

useful when storing frequencies and associated

data that you temporarily change in Memory

Recall mode.

1 Recall the desired memory channel {page 51}.

2 Press [QMI/ M.IN] to enter Memory Scroll

mode.

•To exit Memory Scroll mode, press

[MTR/ CLR].

3 Select the memory channel where you would

like the data copied, using the MULTI control.

4 Press [QMI/ M.IN] (1 s).

98~00lennahC a 98~00lennahC

ycneuqerfXR

ycneuqerfXT

XRrofedoM

XTrofedoM

petsycneuqerfXR

petsycneuqerfXT

ycneuqerfenoT

ycneuqerfSSCTC

SSCTC/enoT

sutatsFFO/NO

SSCTC/enoT

sutatsFFO/NO

emaNyromeM

lennahCyromeM

FFO/NOtuokcoL

lennahCyromeM

FFOtuokcoL

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Kenwood TS-480SAT in the language / languages: English as an attachment in your email.

The manual is 6,73 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kenwood TS-480SAT

Kenwood TS-480SAT User Manual - German - 104 pages

Kenwood TS-480SAT User Manual - Dutch - 104 pages

Kenwood TS-480SAT User Manual - French - 104 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Kenwood TS-480SAT Manual

Product: