Manual Kenwood TS-480SAT (page 59 of 104) (English)

511243

Zoom out

Zoom in

1/104

11 MEMORY FEATURES

■ Split-Frequency Channels

1 Press [A/B / M/V] to select VFO A or VFO B.

•“tA” or “tB” appears to show which VFO

is selected.

2 Select the frequency, mode, etc. to be stored.

• This frequency and mode will be used for

transmitting.

3 Press [A/B / M/V] to select the other VFO.

4 Select the reception frequency and mode.

5 Press [A=B/ SPLIT] (1 s).

•“ ” appears.

6 Press [QMI/ M.IN] (1 s) to enter Memory Scroll

mode.

•To exit Memory Scroll mode and abort the

storage process, press [MTR/ CLR].

7 Turn the MULTI control, or press Mic [UP]/

[DWN] to select a memory channel.

•You can also select a channel by entering a

2-digit number, such as 12, using the

numeric keys. Press [1], [2] for example.

8 Press [QMI/ M.IN] to store the data.

• The previous data stored in the channel is

overwritten.

Note:

When subtone frequencies differ between TX and RX

while performing memory-VFO split operation, the subtone

frequency for TX will be stored in the memory channel.

MEMORY RECALL AND SCROLL

There are 2 modes which allow you to retrieve

frequencies and associated data that you stored in a

memory channel: Memory Recall and Memory Scroll.

Memory Recall:

In this mode, the transceiver receives and transmits

using a frequency that you retrieve. You can

temporarily change the frequency and associated

data without overwriting the contents of the memory

channel when Menu No. 07 is ON (default is OFF).

Memory Scroll:

Use this mode to check the contents of the memory

channels without changing the current reception

frequency. In this mode, frequencies you retrieve are

not used for receiving and transmitting.

■

Memory Recall

1 Press [A/B / M/V] (1 s) to enter Memory Recall

mode.

• The memory channel that was last selected

appears.

2 Turn the MULTI control, or press Mic [UP]/

[DWN] to select a memory channel.

• Continuously holding down Mic [UP]/

[DWN] steps the transceiver through the

memory channels until the key is released.

• Memory channels which contain no data are

skipped.

•You cannot change memory channels while

transmitting.

3 To exit Memory Recall mode, press

[A/B / M/V] (1 s).

Note:

If Menu No. 07 is selected “on”, the frequency of the split-

memory channel can be changed while using the TF-SET

function.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Kenwood TS-480SAT in the language / languages: English as an attachment in your email.

The manual is 6,73 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kenwood TS-480SAT

Kenwood TS-480SAT User Manual - German - 104 pages

Kenwood TS-480SAT User Manual - Dutch - 104 pages

Kenwood TS-480SAT User Manual - French - 104 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Kenwood TS-480SAT Manual

Product: