45743
53
Zoom out
Zoom in
Previous page
1/150
Next page
45
SUB-RECEIVER
SUB-RECEIVER
The TS-2000(X) transceiver is equipped with
2 independent receivers. The main transceiver can
receive from 30 kHz to the UHF band (or 1.2 GHz
band if the optional UT-20 is installed) while the sub-
receiver can receive signals in FM or AM mode on
the VHF (144 MHz) or UHF (430/ 440MHz) band.
You can assign the sub receiver to monitor the local
repeater activities or your club channel while you are
operating on the HF/ 50MHz or VHF/ UHF/ (Optional
1.2 GHz) bands with the main transceiver.
Since the TS-2000 also has a built-in TNC, you can
assign the sub-receiver to monitor the local DX
Packet Cluster channel activities without using an
external TNC. If a new DX station is reported to the
DX Packet Cluster, the transceiver automatically
displays the DX station data. If desired, you can
further transfer the DX frequency information to the
main tranceiver to watch and instantly make contact
with the DX station {page 53}.
TX BAND AND CONTROL BAND
In this manual, the frequency on the left of the display
is referred to as the MAIN band and the frequency on
the right is called the SUB band.
To understand how to control the MAIN band and
SUB band frequencies and functions, please note the
differences between the TX band and the Control
band, below.
TX BAND
Press [MAIN] to display the “ ” and “ ” icons on
the MAIN band. When “ ” is on the MAIN band
display, the MAIN band is currently selected as the
transmission band. You can use the MAIN band
frequency to transmit signals or to control the main
transceiver functions.
If you press [SUB], the “ ” and “ ” icons move to
the SUB band display. This means that the SUB
band is now selected as the transmission band and
controls the functions. You can use the SUB band
frequency to transmit signals or control the sub
receiver functions.
CONTROL BAND
On some occasions, you may need to adjust the
frequency and/ or functions for the band you are not
transmitting on. To do this, press [CTRL]. For
example, if both “ ” and “ ” are on the MAIN
band display, pressing [CTRL] will move “ ” to the
SUB band display. “ ” remains on the MAIN band
display. This allows you to continue transmitting on
the MAIN band while you adjust the functions of the
sub-receiver.
RECEIVING
ACTIVATING THE SUB-RECEIVER
Press the SUB AF control to switch the sub-receiver
ON or OFF. The orange LED above the SUB AF/ SQL
control lights when the sub-receiver is switched ON.
Note: When switching the sub-receiver ON or OFF, you may hear a
popping sound from the speaker. This is not a malfunction.
CONTROLLING THE SUB-RECEIVER
To control all the available functions of the sub-
receiver, press [SUB] to transfer the controls and
transmission capability to the sub-receiver. The “
and “ ” icons move from the main transceiver to the
sub-receiver. When you press [SEND] or Mic [PTT],
the transceiver transmits on the SUB band frequency.
Or, if you would like to transmit and receive on the
MAIN band while adjusting the sub-receiver
functions, simply press [CTRL]. Only the “ ” icon
moves from the main transceiver display to the sub
display. The “ ” icon remains on the main
transceiver display. With this setup, you can continue
receiving and transmitting on the main transceiver
VFO frequencies while you are making adjustments
to the sub-receiver functions.
If you need to adjust only the frequency of the sub-
receiver, you can simply turn the RIT/ SUB control.
However, this works only when you are operating the
main transceiver without the RIT/ XIT functions.
When operating the main transceiver with the RIT/
XIT function, first switch OFF the RIT/ XIT function by
pressing [RIT/ CW TUNE] and/or [XIT/ ALT], or press
[CTRL] to move the controls to the SUB band. Then
turn the Tuning control, the MULTI/ CH control or the
RIT/ SUB control to adjust the SUB band frequency.
SELECTING A BAND
Press [SUB] or [CTRL] to assign the function
controls to the sub-receiver.
Press [+]/ [–] to select the 144 MHz or the
430/ 440 MHz band.
53


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kenwood TS-2000E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kenwood TS-2000E in the language / languages: English as an attachment in your email.

The manual is 2,89 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info