606708
71
Zoom out
Zoom in
Previous page
1/77
Next page
VGS-3
Continuous Recording
Received signals on the control band are continuously
recorded, with the memory retaining the last 30 seconds of
recorded signals.
1 Enter Menu mode and access Menu 009.
2 Set the Continuous Recording to ON (or OFF).
When selecting “ON”, Continuous Recording turns ON. When
the control band squelch opens, the icon appears on the
display and Received signals are recorded.
Received signals are saved in the SRAM memory.
3 Press the PF key programmed as [VGS].
4 Press [4] (1s).
Up to 30 seconds of received signal recordings from the
SRAM memory are written to channel 4.
Note: The icon does not appear during playback, in Repeater mode, or
in Remote Control mode.
Playback
1 Press the PF key programmed as [VGS].
When preparing to transmit, press the [PTT] switch before
pressing the channel number (1 - 3) key.
2 Press the key for the VGS channel number you want
to playback: [1], [2], [3], or [4] (when the Continuous
Recording is ON).
The recording saved in the channel you selected is played
back.
To end playback at any time, press [CLR].
Playback signals are output from the PTT band side. Use the
[BAND SEL (VOL)] of the PTT band to adjust the speaker
volume.
To exit, press [VGS] again.
During playback, you can switch to any of recordings 1, 2, 3,
or 4 by pressing the appropriate key.
Playback Repeat
You can set messages to be repeatedly played back.
1 Enter Menu mode and access Menu 007.
2 Set the Playback Repeat function to ON or OFF.
Playback Repeat Interval
If the Playback Repeat function is activated, you can set a
time interval for how often the memo/message is played back.
1 Enter Menu mode and access Menu 008.
2 Set the interval from 0 to 60 seconds.
71


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kenwood TM-D710GE at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kenwood TM-D710GE in the language / languages: English as an attachment in your email.

The manual is 7,22 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kenwood TM-D710GE

Kenwood TM-D710GE User Manual - English - 55 pages

Kenwood TM-D710GE User Manual - German - 74 pages

Kenwood TM-D710GE User Manual - Dutch - 75 pages

Kenwood TM-D710GE User Manual - Dutch - 55 pages

Kenwood TM-D710GE User Manual - French - 77 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info