606708
70
Zoom out
Zoom in
Previous page
1/77
Next page
VGS-2
AUTO:
Announcements are made automatically when changing a
mode/frequency/setting.
Operation Announcement
CTCSS frequency
setup
“CTCSS frequency” + frequency value
DCS code setup “DCS” + code value
Cross tone setup
“TX” + “TONE” or “DCS” + “RX” +
“TONE” or “CTCSS” or “DCS” or “OFF”
MHz step
frequency setup
“MHz Step” + frequency value
10 MHz setup “10” + “MHz setup” + frequency value
Output power
setup
“TX Power” + power level
Receiving APRS
message
Call sign +“Message” + APRS
message
Voice Announcement Language
1 Enter Menu mode and access Menu 004.
2 Set the language to ENGLISH or JAPANESE.
Voice Announcement Volume
1 Enter Menu mode and access Menu 005.
2 Set the announcement volume level from 1 to 7.
To turn the volume OFF, turn the announcement function
OFF.
Voice Announcement Speed
1 Enter Menu mode and access Menu 006.
2 Set the announcement speed level from 0 to 4.
The speed settings are as follows:
0: 0.85 times normal speed
1: Normal speed
2: 1.15 times normal speed
3: 1.30 times normal speed
4: 1.45 times normal speed
VOICE RECORDER
The voice recorder provides you with 3 VGS channels for
recording voice memos, along with a single VGS channel for
continuous recording. You can also prepare automated message
responses to received calls.
Each recording can last for up to 30 seconds.
Voice Memos
To record a voice memo, for later playback:
1 Press the PF key programmed as [VGS].
2 Press and hold the key for the VGS channel number you
want to store the memo in: [1], [2], or [3].
A beep will sound and the transceiver will enter Recording
mode.
3 Press and hold the VGS channel number key again (the
same key you pressed in the previous step), then speak
into the microphone to record your memo.
Recording begins as soon as you press the VGS channel
number key, and a timer appears on the display.
Pressing the microphone PTT switch at this time will
transmit your message as well as record it. Do not press the
microphone PTT switch if you do not want to transmit your
message.
4 Release the VGS channel number key to end the
recording at any time and store it into the selected VGS
channel.
If the memory becomes full, recording will stop automatically
and store the voice memo to memory.
“WRITING” appears on the display while the recording is
being stored to memory.
To exit, press [VGS] again.
70


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kenwood TM-D710GE at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kenwood TM-D710GE in the language / languages: English as an attachment in your email.

The manual is 7,22 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kenwood TM-D710GE

Kenwood TM-D710GE User Manual - English - 55 pages

Kenwood TM-D710GE User Manual - German - 74 pages

Kenwood TM-D710GE User Manual - Dutch - 75 pages

Kenwood TM-D710GE User Manual - Dutch - 55 pages

Kenwood TM-D710GE User Manual - French - 77 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info